Operation Manual

General information
9
1
Warning LED indications 1
The Warning LED (Light Emitting Diode) is a
light that shows the DCP status. The LCD
shows the current machine status when the
machine is idle.
LCD display 1
Setting the backlight
brightness 1
If you are having difficulty reading the LCD,
try changing the brightness setting.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose Backlight.
Press OK.
e Press a or b to choose Light, Med or
Dark.
Press OK.
f Press Stop/Exit.
LED DCP
status
Description
Off
Ready The DCP is ready for
use.
Orange
Cover open The cover is open.
Close the cover. (See
Error and maintenance
messages on page 40.)
Cannot
print
Replace the ink
cartridge with a new
one. (See Replacing the
ink cartridges
on page 32.)
Paper error Put paper in the tray or
clear the paper jam.
Check the LCD
message. (See
Troubleshooting
on page 39.)
Other
messages
Check the LCD
message. (See Error
and maintenance
messages on page 40.)