Specifications

Variables Description Sample Value Range
INTRAY5SIZE Returns the size information for the optional lower paper cassette. (same as INTRAY1SIZE)
INTRAY6SIZE Returns the size information for the optional lower paper cassette. (same as INTRAY1SIZE)
SOURCETRAY Selects the paper source tray. AUTO, MPTRAY, TRAY1, TRAY2, TRAY3, TRAY4, TRAY5
XOFFSET Sets the X offset ( horizontal offset ) value. -500 to 500 dots
YOFFSET Sets the Y offset ( vertical offset ) value. -500 to 500 dots
DUPLEX Duplex mode ON, OFF
BINDING Returns the setting of binding edge selection for duplex printing. LONGEDGE, SHORTEDGE
FIRSTPRINT First print mode. This makes the first print speed faster by starting
the polygon mirror motor at Power On. Setting to MIDDLE is
effective only for the first page after Power ON. Setting to HIGH
makes the scanner motor rotate continuously.
NORMAL, MIDDLE, HIGH
DENSITY Returns the printing density level setting from 1 to 15. The default
value is 8.
1 (lighter) to 15 (darker)
LANG Returns the language for control panel and status readback
information.
ENGLISH, FRENCH, GERMAN, DUTCH, SPANISH, ITALIAN, NORWEGIAN, FINNISH, PORTUGUESE, DANISH, SWEDISH,
CZECH, POLISH, HUNGARIAN, RUSSIA, BULGARIAN, ROMANIAN, SLOVAKIAN, JAPANESE
CPLOCK Returns the lock status of the control panel. If OFF, the control
panel is unlocked. If ON, the control panel is locked.
OFF, ON
PASSWORD Password for panel lock to write to the NVRAM with the
DEFAULT/INITIALIZE command.
0 to65535
ECONOMODE Toner Saving Mode OFF, ON
ECONOLEVEL Level for Toner saving mode. If set to 1, approx. 50 % toner is
saved. If set to 2, approx. 25% toner is saved.
1, 2
MPTRAY MP Tray Priority For AUTO feeder selection mode. CASSETTE, FIRST
TIMEOUT Sets the timeout value for Automatic interface switching (seconds) 1 to 99
AUTOFF Sets the auto FF setting to ON or OFF. ON or OFF
TIMEOUTFF Sets the timeout value for auto FF. (seconds) 1 to 99
AUTOSLEEP Power Save Mode ON, OFF
TIMEOUTSLEEP Timeout for Power Save mode. The printer goes into the power
save mode after this time-out period (minutes).
1 to 99
MEDIATYPE Media Type. The temperature of fixing unit is adjusted depending
on this setting.
REGULAR, THICK, THICK2, TRANSPARENCY, THIN, BOND, ENVELOPES, ENVTHICK, ENVTHIN, RECYCLED, POSTCARD,
LABEL
REPRINT Sets the reprint function. OFF, ON, JOB
COLLATE Sets the collate printing. ON, OFF
HOLD Specifies whether the received data is stored in the hard disk or OFF, STORE, PROOF
HOLDTYPE Specifies the document type of the received data which has been
stored in the optional hard disk. If PRIVATE is selected, a
password is required for the data to be printed or deleted.
PUBLIC, PRIVATE
HOLDKEY Specifies the password when the document type is set to PRIVATE. 0 to 9 (4 digits to be selected)
TIMESETYEAR Clock: year setting 1998 to 2039
TIMESETMONTH* Clock: month setting 1 to 12
TIMESETDAY Clock: date setting 1 to 31
CHAPTER 5 PJL - 51