User Manual
Table Of Contents
- USER'S GUIDE MFC-440CN/665CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I General
- 1 General Information
- 2 Loading documents and paper
- 3 General setup
- 4 Security features
- Section II Fax
- 5 Sending a fax
- Entering Fax mode
- Broadcasting (Monochrome only)
- Additional sending operations
- Sending faxes using multiple settings
- Contrast
- Changing fax resolution
- Dual access (Monochrome only)
- Real time transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Setting your changes as a new default
- Restoring all settings to the factory settings
- Sending a fax manually
- Sending a fax at the end of a conversation
- Out of Memory message
- 6 Receiving a Fax
- 7 Telephone Services and External devices
- 8 Dialling and storing numbers
- 9 Digital TAD (MFC-665CW only)
- 10 Advanced fax operations (Monochrome only)
- 11 Printing Reports
- 12 Polling
- 5 Sending a fax
- Section III Copy
- 13 Making copies
- How to copy
- Copy settings
- ‘Out of Memory’ message
- 13 Making copies
- Section IV Direct Photo Printing
- Section V Software
- Section VI Appendixes
- A Safety and Legal
- B Troubleshooting and Routine Maintenance
- Troubleshooting
- Error messages
- Routine maintenance
- Replacing the ink cartridges
- Cleaning the outside of the machine
- Cleaning the scanner
- Cleaning the machine printer platen
- Cleaning the paper pick-up roller
- Cleaning the print head
- Checking the print quality
- Checking the printing alignment
- Checking the ink volume
- Uninstalling the handset and handset cradle (MFC-665CW only)
- Machine Information
- Packing and shipping the machine
- C Menu and Features
- D Specifications
- E Glossary
- F Index
- Brother ENG
Digital TAD (MFC-665CW only)
65
9
Managing your
messages 9
Message indicator 9
The light flashes if you have any new
messages waiting for you.
The LCD displays the total number of voice
and fax messages stored in the TAD
memory.
Fax messages are only stored when Fax
Storage or Fax Preview is turned on. See
Advanced fax operations (Monochrome
only) on page 68.
Playing voice messages 9
All messages are played in the order they
were recorded. The LCD shows the number
of the current message, the total number of
messages, and the time and date the
message was recorded.
Follow the steps below to listen to your voice
messages:
a Press Play/Record.
The following commands are available
when playing messages:
b Press Stop/Exit.
Erasing incoming messages 9
To erase voice messages individually 9
a Press Play/Record.
The machine will sound a two second
beep and begins message playback.
Each message is preceded by one long
beep, and followed by two short beeps.
b To erase a specific message, press
Erase/Hold immediately after the two
short beeps, or while the message is
playing.
c Do one of the following:
Press 1 to erase the message.
Press 2 to cancel.
d Press Stop/Exit.
To erase all of your messages 9
a Press Erase/Hold.
The LCD displays the following:
Erase All Voice?
YesiPress 1
NoiPress 2
b Do one of the following:
Press 1 to erase all of your voice
messages.
Press 2 to cancel.
c Press Stop/Exit.
l (RWD)
Repeats a message.
# (FWD)
Skips to the next message.
or
Adjusts the volume.