Operation Manual

Chapter 2
16
l Close the paper tray cover and slowly
push the paper tray into the machine.
Pull out the paper support (1) until it
clicks and unfold the paper support
flap (2).
Note
If you are finished using A3, Ledger or
Legal size paper and want to use a
smaller paper size, take the paper out of
the tray. Then shorten the tray by pressing
the universal guide release button (1).
Adjust the paper length guide (2) to fit the
paper size you are going to use. Then put
the smaller paper into the tray.
Loading envelopes and
postcards 2
About envelopes 2
 Use envelopes that weigh between 80 to
95 g/m
2
.
 Some envelopes need margin settings to
be set in the application. Make sure you
do a test print first before printing many
envelopes.
IMPORTANT
DO NOT use any of the following types of
envelopes, as they will cause paper feed
problems:
• That are of a baggy construction.
• That are embossed (have raised
writing on them).
• That have clasps or staples.
• That are pre-printed on the inside.
Occasionally you may experience paper
feed problems caused by the thickness,
size and flap shape of the envelopes you
are using.
1
2
1
2
Glue Double flap