Operation Manual

General setup
29
3
Paper settings 3
Paper Size and Type 3
When you load a different size of paper in
Tray #1 or Tray #2, you will need to change
the paper size setting in the machine at the
same time.
To get the best print quality, set the machine
for the type of paper you are using.
You can use seven sizes of paper for printing
copies: A3, A4, A5, 10 × 15 cm (4 × 6 in.),
Ledger, Letter and Legal and five sizes for
printing faxes: A3, A4, Ledger, Letter and
Legal.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display Tray Setting.
e Press Tray Setting.
f Press Tray#1 or Tray#2.
g Do one of the following:
 If you chose Tray#1, press d or c to
display the paper size options, and
press A4, A5, A3, 10x15cm,
Letter, Legal or Ledger.
Press the paper type:
Plain Paper, Inkjet Paper,
Brother BP71, Other Glossy
or Transparency.
 If you chose Tray#2, press A4, A3,
Letter, Legal or Ledger.
h Press Stop/Exit.
Note
You can only use plain paper and paper
sizes A3, A4, Ledger, Letter or Legal in
Tray #2.
IMPORTANT
The machine ejects paper with printed
surfaces face up onto the paper tray in
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
Tray use in Copy mode 3
You can change the default tray the machine
will use for printing copies.
To change the default setting follow the
instructions below:
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display Tray Setting.
e Press Tray Setting.
f Press a or b to display
Tray Use:Copy.
g Press Tray Use:Copy.
h Press Tray#1 or Tray#2.
i Press Stop/Exit.
Note
You can change the paper size and tray
selection temporarily for the next copy.
(See Paper Options on page 95.)