Operation Manual

Chapter 3
30
Tray use in Fax mode 3
You can change the default tray the machine
will use for printing received faxes.
Auto Select will allow your machine to
take paper from Tray #1 first, or from Tray #2
if:
 Tray #1 is out of paper.
 Tray #2 is set to a different paper size that
is more suitable for the received faxes.
 Both trays are using the same size paper
and Tray #1 is not set to use plain paper.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display Tray Setting.
e Press Tray Setting.
f Press a or b to display Tray Use:Fax.
g Press Tray Use:Fax.
h Press Tray#1, Tray#2 or
Auto Select.
i Press Stop/Exit.
Secure Paper Feed mode for
A3 size Short Grain Paper 3
If your prints have horizontal lines when using
A3 paper, your paper may be long grain
paper. Set A3 - Short Grain to Off to
avoid this problem.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display
A3 - Short Grain.
e Press A3 - Short Grain.
f Press Off.
g Press Stop/Exit.
Note
• If you are not sure about the type of paper
you are using, consult the paper
packaging or manufacturer for paper
specifications.
• Printing will be slower when using the
A3 - Short Grain setting On.