User Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Table of Contents
- Windows®
- Printing
- Scanning
- ControlCenter3
- Remote Setup (Not available for DCP models, MFC-253CW, MFC-255CW, MFC-257CW and MFC-295CN)
- Brother PC-FAX Software (MFC models only)
- PhotoCapture Center™
- Firewall settings (For Network users)
- Apple Macintosh
- Printing and Faxing
- Scanning
- ControlCenter2
- Remote Setup & PhotoCapture Center™
- Using the Scan key
- Index
- brother CHN-ENG
Remote Setup & PhotoCapture Center™
158
11
PhotoCapture Center™ 11
You can access a memory card or a USB Flash memory drive installed in the machine from a Macintosh.
CAUTION
DO NOT start your Macintosh with a memory card or a USB Flash memory drive installed in the media drive
of the machine. You could lose your data or damage the media.
Note
• The PhotoCapture Center™ will read only the media that was put in first.
• DCP-373CW, DCP-375CW, DCP-377CW, MFC-253CW, MFC-255CW and MFC-257CW do not support
using a USB Flash memory drive.
• DCP-193C, DCP-195C, DCP-197C, DCP-373CW, DCP-375CW, DCP-357CW, MFC-253CW,
MFC-255CW, MFC-257CW and MFC-295CN do not support using a CompactFlash
®
.
• While the machine is printing from the PhotoCapture Center™, your Macintosh cannot access the
PhotoCapture Center™ for any other operation.
For USB cable users 11
a Put a memory card or USB Flash memory drive into your machine.
Note
If you create a name for the volume label of the memory card or USB Flash memory drive, the name
appears instead of “Removable Disk”.
b Double-click the Removable Disk icon. The files and folders on the memory card or USB Flash memory
drive appear on your screen.
c You can edit a file and save it to another drive on your Macintosh.