Wi-Fi Direct™ Guide

Table Of Contents
Konfigurationsmethoden
5
2
Konfiguration per Tastendruck mit WPS (Wi-Fi Protected Setup)
Für HL-3140CW, HL-3142CW, HL-3150CDW, HL-3152CDW, HL-3170CDW und HL-3172CDW siehe
Konfiguration per Tastendruck mit WPS (Wi-Fi Protected Setup) uu Seite 7.
Für HL-3180CDW, DCP-9015CDW, DCP-9017CDW, DCP-9020CDW, DCP-9022CDW, MFC-9130CW,
MFC-9330CDW, MFC-9332CDW, MFC-9340CDW und MFC-9342CDW siehe Konfiguration per
Tastendruck mit WPS (Wi-Fi Protected Setup) uu Seite 12.
Konfiguration über das PIN-Verfahren mit Wi-Fi Direct
Für HL-3140CW, HL-3142CW, HL-3150CDW, HL-3152CDW, HL-3170CDW und HL-3172CDW siehe
Konfiguration mit dem PIN-Verfahren von Wi-Fi Direct uu Seite 8.
Für HL-3180CDW, DCP-9015CDW, DCP-9017CDW, DCP-9020CDW, DCP-9022CDW, MFC-9130CW,
MFC-9330CDW, MFC-9332CDW, MFC-9340CDW und MFC-9342CDW siehe Konfiguration mit dem PIN-
Verfahren von Wi-Fi Direct uu Seite 13.
Konfiguration über das PIN-Verfahren mit WPS (Wi-Fi Protected Setup)
Für HL-3140CW, HL-3142CW, HL-3150CDW, HL-3152CDW, HL-3170CDW und HL-3172CDW siehe
Konfiguration über das PIN-Verfahren des WPS (Wi-Fi Protected Setup) uu Seite 9.
Für HL-3180CDW, DCP-9015CDW, DCP-9017CDW, DCP-9020CDW, DCP-9022CDW, MFC-9130CW,
MFC-9330CDW, MFC-9332CDW, MFC-9340CDW und MFC-9342CDW siehe Konfiguration über das
PIN-Verfahren des WPS (Wi-Fi Protected Setup) uu Seite 14.
Manuelle Wireless-Konfiguration
Für HL-3140CW, HL-3142CW, HL-3150CDW, HL-3152CDW, HL-3170CDW und HL-3172CDW siehe
Manuelle Konfiguration für ein Wi-Fi Direct-Netzwerk uu Seite 10.
Für HL-3180CDW, DCP-9015CDW, DCP-9017CDW, DCP-9020CDW, DCP-9022CDW, MFC-9130CW,
MFC-9330CDW, MFC-9332CDW, MFC-9340CDW und MFC-9342CDW siehe Manuelle Konfiguration für
ein Wi-Fi Direct-Netzwerk uu Seite 15.
HINWEIS
Zur Verwendung der Brother iPrint&Scan-Funktionalität in einem Wi-Fi Direct-Netzwerk, das anhand von
Konfiguration per Tastendruck mit Wi-Fi Direct oder Konfiguration über das PIN-Verfahren mit Wi-Fi Direct
konfiguriert ist, muss auf dem zur Konfiguration von Wi-Fi Direct verwendeten Gerät Android™ 4.0 oder
höher ausgeführt werden.