BRAdmin Professional 4 User's Guide
Table Of Contents
- BRAdmin Professional 4 User’s Guide
- Copyright
- Trademarks
- Important Note
- Table of Contents
- 1 Introduction
- 2 Manage Devices
- 3 Actions
- 4 Instant Tasks
- 5 Scheduled Tasks
- 6 Task Monitoring
- 7 Application Settings
- 7.1 General
- 7.2 Configure the Device Discovery Settings
- 7.3 Configure the Network Settings
- 7.4 Configure the Email Server Settings
- 7.5 Secure the Application with a Password
- 7.6 Device Master Settings
- 7.7 Create a Device Log Profile
- 7.8 Create a Device Notification Profile
- 7.9 Create a Device List Profile
- 7.10 Information
- 7.11 Tool: Setting File Editor
- 7.12 Back Up and Restore the Application's Settings and Data
- 8 Troubleshooting and Support
8
4.3 Reboot Devices
1. Select one or more devices.
2. Click Reboot device.
3. Type the Device password for password-protected devices.
4. Click Reboot device.
4.4 Edit Device Settings
1. Select one or more devices.
2. Click Edit device settings.
3. Type the Device password.
4. Edit the settings you want:
- Boot method (network-connected devices only)
- Node name (network-connected devices only)
- Location
- Contact
5. Click Apply to save your changes.
4.5 Activate Custom Software Solutions
A valid license file is necessary for this task. A license file can contain the activation codes, allowing solutions to be
activated on many devices simultaneously. You can send license files to activate custom software solutions on the
target devices.
If you do not have one, contact your local Brother office.
1. Select one or more devices.
2. Click Manage Solutions.
3. Type the Device password.
4. Do one of the following:
• If you have a license file: Select the License file: radio button, and then type the file name in the field below,
or click the Browse… button to select the license file.