User Manual

Secure Network Access
Your machine’s default password is on the label on the
back of the machine (preceded by "Pwd").
We strongly recommend you change it to protect your
machine from unauthorised access.
NOTE
• The Reference Guide for this model is available on the enclosed
installation disc.
• Most of the illustrations in this Quick Setup Guide show the
MFC-J5945DW.
• Save all packing materials and the box in case you must ship your
machine.
• You must purchase the correct interface cable for the interface
you want to use.
USB cable
Use a USB 2.0 cable (Type A/B) that is no more than 5 metres long.
Ethernet (Network) cable
Use a straight-through Category 5 (or greater) twisted-pair cable for
10BASE-T or 100BASE-TX Fast Ethernet Network.
2
Load plain A4 paper
1
Unpack the machine and check the components
The components included in the box may differ depending on your country.
Remove the protective tape or film covering the machine.
Follow the touchscreen
instructions to unpack and
install the ink cartridges.
Close the ink cartridge cover.
The machine will prepare the
ink tube system for printing.
NOTE
Thersttimeyouinstallaset
of ink cartridges the machine
willuseanamountofinktoll
the ink delivery tubes for high
quality printouts. This process
will only happen once.
Open the ink cartridge cover.
After turning the machine on, you may need to set your country
or language (depending on your machine).
If required, follow the touchscreen instructions.
NOTE
You can adjust the control panel angle to read the
touchscreen more easily.
Quick Setup Guide
MFC-J5845DW / MFC-J5945DW
Read the Product Safety Guide first, then read this Quick Setup Guide
for the correct installation procedure.
3
Connect the power
cord
5
Install the inbox ink cartridges
For MFC-J5845DW models: Insert the LC3339 Series Inbox Ink Cartridges first.
4
Select your country
or language
(Initial setup only)
D01D85001-01
OCE/ASA
Version C
1. Press [Settings] > [All Settings] >
[Initial Setup] > [Local Language].
2. Press your language.
3. Press .
8
Select your language
(if needed and only for
certain models)
9
Connect the telephone line cord
If you are not using your machine as a fax, go to
10
.
For more information on using the fax feature, see the Online User’s Guide.
The latest manuals are available at the Brother Solutions Center:
support.brother.com/manuals
Watch our FAQ videos for help
with setting up your Brother
machine.
support.brother.com/videos
6
Set the date and time
Follow the touchscreen instructions to set the date and time.
Quickly shake just the
black ink cartridge
horizontally 15 times as
shown, before inserting it
into the machine.
Follow the touchscreen instructions to configure the
machine’s settings:
• View operation tips
• Set Brother LCD Message defaults
• Check print quality
• Congurethetrayorpapersizesettings
• Print the installation sheet
7
Machine settings
Inbox Ink Cartridges*
• Black
• Yellow
• Cyan
• Magenta
Quick Setup Guide
Product Safety Guide
Power Cord
Brother Installation Disc Maintenance Sheet
Pull the paper tray completely out of
the machine as shown by the arrow.
Take off the tray top cover.
Fan the paper well. Load the paper in the tray.
Adjust the paper guides.
Do not exceed this
mark (bbb).
Pull out the paper support
until it locks into place.
Put on the tray top cover,
and then slowly push the
paper tray completely into
the machine.
Connect the telephone line cord.
Use the socket marked LINE and guide
the cord out the back of the machine.
Lift the scanner cover. Close the scanner cover.
(Example for Australia)
(Example for Australia)