User Manual
Table Of Contents
- BASIC USER’S GUIDE MFC-J6710DW
- User's Guides and where do I find it?
- Table of Contents
- 1 General information
- 2 Loading paper
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Telephone and external devices
- 7 Dialling and storing numbers
- 8 Making copies
- 9 Printing photos from a memory card or USB Flash memory drive
- 10 How to print from a computer
- 11 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Menu and features
- D Specifications
- Index
- brother CHN-ENG
General information
9
1
Setting the Fax Logic
(sending and receiving
sequence)
1
You can change the process of manual fax
send or receive.
If you often send or receive a fax manually
to/from the other party at the end of a
conversation, set the Fax Mode to
Easy Mode.
If you set to Easy Mode:
You can send or receive a fax manually just
simply press Start.
If you are a caller, press Start to send a fax.
If you are a receiver, press Start to receive a
fax.
If you set to Advanced Mode:
No matter you are a caller or receiver, you
can choose you will send or receive a fax
manually. When you press Start, the
machine will ask you:
Send/Receive?
If you want to send a fax, press 1 to choose
Send.
If you want to receive a fax,
press 2 to
choose
Receive.
Note
Even if you set either Easy Mode or
Advanced Mode and if there is a
document in the ADF, the document in the
ADF will be sent by pressing Start.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Miscellaneous.
Press OK.
d Press a or b to choose Fax Mode.
e Press d or c to choose Easy Mode or
Advanced Mode.
Press OK.
f Press Stop/Exit.