User Manual
Table Of Contents
- BASIC USER’S GUIDE MFC-J6710DW
- User's Guides and where do I find it?
- Table of Contents
- 1 General information
- 2 Loading paper
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Telephone and external devices
- 7 Dialling and storing numbers
- 8 Making copies
- 9 Printing photos from a memory card or USB Flash memory drive
- 10 How to print from a computer
- 11 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Menu and features
- D Specifications
- Index
- brother CHN-ENG
35
5
5
Receive Modes 5
By factory default, the factory setting of Receive Mode is “Fax”. Your machine will automatically
receive any faxes that are sent to it. There are four receive modes of this machine as below.
For more detailed information on the receive modes, see Using Receive Modes on page 36.
To set a receive mode follow the instructions below:
a Press Menu.
b Press a or b to choose Initial Setup.
Press OK.
c Press a or b to choose Receive Mode.
d Press d or c to choose Fax Only, Fax/Tel,Manual or External TAD.
Press OK.
e Press Stop/Exit.
The LCD will display the current receive mode.
Receiving a fax 5
Operation Display LCD Display Factory Default Ring Delay
Fax Only Fax Ring Delay: 2 times
Fax detection: On
Fax/Tel F/T Ring Delay: 2 times
Time: 30 seconds
Manual Mnl
External TAD TAD