User Manual
Table Of Contents
- BASIC USER’S GUIDE MFC-J6510DW MFC-J6710DW
- User's Guides and where do I find it?
- Table of Contents
- 1 General information
- 2 Loading paper
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Telephone and external devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 7 Dialling and storing numbers
- 8 Making copies
- 9 Printing photos from a memory card or USB Flash memory drive
- 10 How to print from a computer
- 11 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Menu and features
- D Specifications
- Index
- brother ARL/ASA/NZ
Loading paper
13
2
i While holding the paper tray in place,
pull out the paper support (1) until it
clicks and unfold the paper support
flap (2).
Note
Before you shorten Tray #1, take the
paper out of the tray. Then shorten the
tray by pressing the universal guide
release button (1). Adjust the paper length
guide (2) to fit the paper size you are
going to use. Then put the paper into the
tray.
Loading paper in paper
tray #2 (MFC-J6710DW only) 2
Note
• You can only use plain paper sizes A4,
A3, Ledger, Letter or Legal in Tray #2.
• When you use the Borderless printing
feature paper must be fed from Tray #1.
a Pull the paper tray completely out of the
machine.
Note
• If you are using A3, Ledger or Legal size
paper, press the universal guide release
button (1) as you slide out the front of the
paper tray until it clicks.
• You can check if the length of the tray is
adjusted correctly by opening the paper
tray cover.
1
2
1
2
1