User Manual
Table Of Contents
- BASIC USER’S GUIDE MFC-J6510DW MFC-J6710DW
- User's Guides and where do I find it?
- Table of Contents
- 1 General information
- 2 Loading paper
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Telephone and external devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 7 Dialling and storing numbers
- 8 Making copies
- 9 Printing photos from a memory card or USB Flash memory drive
- 10 How to print from a computer
- 11 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Menu and features
- D Specifications
- Index
- brother ARL/ASA/NZ
Loading paper
17
2
Loading paper in the manual
feed slot 2
You can load special print media one at a
time into this slot. Use the manual feed slot to
print or copy on envelopes, labels or thicker
paper.
Note
• The machine automatically turns on the
Manual Feed mode when you put paper in
the manual feed slot.
• When you use the Borderless printing
feature paper must be fed from Tray #1.
a Open the manual feed slot cover.
b Slide the manual feed slot paper guides
to fit the paper width that you are going
to use.
c Put only one sheet of paper in the
manual feed slot with the side to be
printed face up.
IMPORTANT
• DO NOT put more than one sheet of paper
in the manual feed slot at any time. Doing
this may cause a paper jam. Wait until the
LCD shows
Put paper in Manual Feed Slot
Then Press Start before you feed
the next sheet of paper in the manual feed
slot.
• DO NOT put paper in the manual feed slot
when you are printing from Tray #1 or
Tray #2. Doing this may cause a paper
jam.