User Manual
Table Of Contents
- BASIC USER’S GUIDE MFC-J6510DW MFC-J6710DW
- User's Guides and where do I find it?
- Table of Contents
- 1 General information
- 2 Loading paper
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Telephone and external devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 7 Dialling and storing numbers
- 8 Making copies
- 9 Printing photos from a memory card or USB Flash memory drive
- 10 How to print from a computer
- 11 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Menu and features
- D Specifications
- Index
- brother ARL/ASA/NZ
Chapter 2
22
Paper settings 2
Paper Size and Type
(MFC-J6510DW) 2
Paper Type 2
To get the best print quality, set the machine
for the type of paper you are using.
a Press Paper Setting.
b Press a or b to choose Paper Type.
c Press d or c to choose Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61, Other Glossy or
Transparency.
Press OK.
d Press a or b to choose Complete.
Press OK.
Note
The machine ejects paper with printed
surfaces face up onto the paper tray in
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
Paper Size 2
You can use seven sizes of paper for printing
copies: A4, A5, A3, 10 15 cm, Letter, Legal
and Ledger and five sizes for printing faxes:
A4, A3, Ledger, Letter and Legal. When you
change the size of paper you load in the
machine, you will need to change the paper
size setting at the same time so your machine
can fit an incoming fax on the page.
a Press Paper Setting.
b Press a or b to choose Paper Size.
c Press d or c to choose A4, A5, A3,
10x15cm, Letter, Legal or Ledger.
Press OK.
d Press a or b to choose Complete.
Press OK.