User Manual

58
8
How to copy 8
The following steps show the basic copy
operation. For details about each option, see
the Advanced User’s Guide.
a Make sure you are in copy mode, press
(COPY) to illuminate it in blue.
 The LCD shows:
1 No. of Copies
You can enter the number of copies you
want by using the dial pad.
Note
The default setting is Fax mode. You can
change the amount of time that the
machine stays in Copy mode after the last
copy operation. (See Mode Timer in
chapter 1 of the Advanced User’s Guide.)
b Do one of the following to load your
document:
 Place the document face up in the
ADF.
(See Using the ADF on page 29.)
 Place the document face down on
the scanner glass.
(See Using the scanner glass
on page 30.)
c If you want more than one copy, enter
the number (up to 99).
d Press Mono Start or Colour Start.
Stop copying 8
To stop copying, press Stop/Exit.
Copy settings 8
You can change the following copy settings.
Press COPY and then press a or b to scroll
through the copy settings. When the setting
you want is highlighted, then press d or c to
choose your option, and press OK.
(Basic User's Guide)
For details about changing the following copy
settings, see page 59.
 Paper Type
 Paper Size
 Tray Select (MFC-J6710DW)
(Advanced User’s Guide)
For details about changing the following copy
settings, see chapter 7:
 Quality
 Enlarge/Reduce
 Page Layout
 2 in 1 (ID)
Making copies 8
1
0101
COPY
COPY
Quality Normal
Paper Size
Copy Press Start
Paper Type Plain Paper
A4