User Manual

Making copies
59
8
 Stack/Sort
 Density
 Ink Save Mode
 Thin Paper Copy
 Skew Adjustment
 Book Copy
 Watermark Copy
 Duplex Copy
 Set New Default
 Factory Reset
Note
If you want to sort copies, use the ADF.
Paper Options 8
Paper Type 8
If you are copying on special paper, set the
machine for the type of paper you are using to
get the best print quality.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Paper Type.
e Press d or c to choose Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61, Other Glossy or
Transparency.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Paper Size 8
If you are copying on paper other than A4
size, you will need to change the paper size
setting. You can copy only on A4, A5, A3,
Photo 10  15 cm, Letter, Legal or Ledger
paper.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Paper Size.
e Press d or c to choose A4, A5, A3,
10x15cm, Letter, Legal or Ledger.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Tray Select (MFC-J6710DW only) 8
You can change the tray temporarily for the
next copy. To change the default tray setting
see Tray use in Copy mode (MFC-J6710DW
only) on page 23.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Tray Select.
e Press d or c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
Poster copy is not available when you use
Tray #2.