User Manual
Table Of Contents
- BASIC USER’S GUIDE MFC-J6510DW MFC-J6710DW
- User's Guides and where do I find it?
- Table of Contents
- 1 General information
- 2 Loading paper
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Telephone and external devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 7 Dialling and storing numbers
- 8 Making copies
- 9 Printing photos from a memory card or USB Flash memory drive
- 10 How to print from a computer
- 11 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Menu and features
- D Specifications
- Index
- brother ARL/ASA/NZ
Troubleshooting
81
B
Wrong Paper Size The Paper Size setting does not
match the size of paper in the tray. Or,
you did not set the paper guides in the
tray to the indicators for the paper size
you are using.
1 Check that the paper size you
choose matches the size of paper
in the tray.
2 Make sure you loaded the paper in
a Portrait position, by setting the
paper guides at the indicators for
your paper size.
3 After you have checked the paper
size and the paper position, press
Mono Start or Colour Start to
continue printing.
Wrong Tray Setting
(MFC-J6710DW)
The machine’s Paper Size and Tray
Use settings do not match the size of
paper in the tray you are using.
1Press Tray Setting, and make
sure the machine’s Paper Size and
Tray Use settings match the size
of paper in the tray you are using.
(See Paper Size and Type
(MFC-J6710DW) on page 23 and
Tray use in Copy mode
(MFC-J6710DW only)
on page 23.)
2 After you have checked the paper
size and tray use settings, press
a or b to choose
Restart Printing, and press
OK to continue printing.
Error Message Cause Action