User Manual

12
Connecting the product safely A
WARNING
There are high voltage electrodes inside the product. Before you clean the inside of the product,
make sure you have unplugged the telephone line cord first (MFC only) and then the power cord
from the electrical socket. Doing this will prevent an electrical shock.
DO NOT use the AC power cord to pull or push the plug into the wall socket, use the finger grips
on the plug.
DO NOT handle the plug with wet hands. Doing this may cause an electrical shock.
Always make sure the plug is fully inserted.
This product should be connected to an AC power source within the range indicated on the
rating label. DO NOT connect it to a DC power source or inverter. If you are unsure, contact a
qualified electrician.
(Example for Australia
and New Zealand)
(Example for Australia
and New Zealand)