Mass Deployment Tool User's Guide

36
The exit codes provided by the Mass Deployment Tool (CLI) allow you to identify deployment errors.
GUI/CLI Errors
For more information and help, see section 7 Troubleshooting.
Appendix
GUI: Error CLI: Exit Code Description
Admin account locked 80009
The administrator password for the target device was
entered incorrectly too many times.
Already activated 80023 The device has already been activated.
Already set 80054 The password has already been changed.
Cannot convert to PJL 80030 Cannot convert the setting file to the PJL file.
Cannot convert to Setting file 80031 Cannot convert the PJL file to the setting file.
Connection error 80015 Connection error.
Deploy results mismatch 80032 The setting file deployment results do not match.
Device internal error 80035 Device internal error.
Device is busy 80007 Device is busy.
File not found 80011 File not found.
File write error 80010 File write error.
Firmware Update required 80033 Firmware update required.
Internal error 80052 Internal error in the application.
Invalid deploy setting file 80029 Invalid deploy setting file.
Invalid file error 80026 Invalid file error.
License error 80022 License error.
New version schema required 80034 New version schema required.
Not supported 80008 Not supported.
Package password incorrect 80071 Incorrect package password.
Partially complete 80067 The license activation is only partially complete.
Password incorrect 80005 Incorrect password.
Permission error 80012 Access denied.
Serial number mismatch 80006
The serial number entered does not match the serial
number identified.
Server communication error 80014 Server communication error.
Session timeout 80021 Session timeout.
SNMP communication error 80013 SNMP communication error.
SNMP v3 security error 80055 SNMP v3 security error.
Solution not supported 80068 Not all features are supported by this license.
Unauthorized access error 80020
The maximum number of password attempts has been
exceeded.
Universal Print Internal error 80203 Microsoft Universal Print Internal error.
Universal Print Internal error –
Length excess
80205 The token size exceeds the limit.
Universal Print Internal error –
Unready
80201
The device is not yet ready to register for
Microsoft Universal Print.