Mass Deployment Tool User's Guide
Table Of Contents
- Mass Deployment Tool Benutzerhandbuch
19
activate Es ist entweder „Device
identifier“ oder „profile“
erforderlich.
1
● Device identifier
Erforderlich:
● networksettingpath
● activateresult
● licensecode
Optional:
● password
● profile
Erforderlich:
● networksettingpath
● activateresult
Optional:
● profilepassword
● csvdelim
Verfügbar in beiden, falls
erforderlich:
● dkeypassword
● dkeyfile
● log
● communitynameset
● communitynameget
Ermöglicht Ihnen, für das spezifizierte Zielgerät eine
benutzerdefinierte Softwarelösung zu aktivieren.
Beispiel:
settingcmd.exe activate --ip IP_address
--networksettingpath (Netzwerk-
Kommunikationseinstellungen Dateiname)
--licensecode your_license_code
--activateresult your_result_path
settingcmd.exe activate --profile
your_profile_name.csv --networksettingpath
(Netzwerk-Kommunikationseinstellungen Dateiname)
--activateresult your_result_path
(m)setpassword
Der Befehl
„msetpassword“
muss „profile“
verwenden.
Es ist entweder „Device
identifier“ oder „profile“
erforderlich.
1
● Device identifier
Optional:
● newpassword
● profile
Erforderlich:
● result
Optional:
● profilepassword
● csvdelim
Verfügbar in beiden, falls
erforderlich:
● networksettingpath
● dkeypassword
● dkeyfile
● log
● communitynameset
● communitynameget
Ermöglicht das Ändern des Administrator-Kennworts vom
Standard-Anmeldekennwort in ein anderes Kennwort.
Beispiel:
settingcmd.exe setpassword --ip IP_address
--newpassword your_new_password
settingcmd.exe msetpassword --profile
your_profile_name.csv --result
your_filename.csv
Bestätigen Sie das Ergebnis für jedes Gerät in der
Ergebnisdatei (CSV). Die Ergebnisdatei enthält alle
Elemente in Ihrem Bereitstellungsprofil nebst den folgenden
Elementen:
- Result
- Detail
- Start time
- Finish time
pack Erforderlich:
● output
● packfiles
Optional:
● password
● log
Erstellt aus JSON-Einstellungsdateien und deren
Ressourcendateien eine Paketdatei mit den Einstellungen.
Sollten Sie die Option „—password“ verwenden, wird die
Paketdatei verschlüsselt.
Beispiel:
settingcmd.exe pack --packfiles
your_file_name.json
your_file_name.xml
your_file_name_2.xml
--output your_file_name.edpk
--password your_password
Befehl Option Beschreibung