Product Safety Guide
Table Of Contents
- Product Safety Guide
- Compilation and Publication Notice
- Choose a Safe Location for Your Product
- Connect the Product Safely
- Use the Product Safely
- Regulations
- Standard Telephone and FCC Notices (MFC Models Only)
- Federal Communications Commission (FCC) Declaration of Conformity (USA Only)
- RF Exposure Notice (USA or Canada Only) (Wireless Models Only)
- Wireless Connection (Mexico Only) (Wireless Models Only)
- Industry Canada Compliance Statement (Canada Only)
- EQUIPMENT ATTACHMENT LIMITATIONS (Canada Only) (MFC Models Only)
- Laser Safety (for 110-120V Models Only)
- FDA Regulations (for 110-120V Models Only)
- For Use in the USA or Canada Only
- LAN Connection (Models with Wired LAN Function Only)
- International ENERGY STAR® Qualification Statement (HL models only)
- Trademarks
- Open Source Licensing Remarks
- Copyright and License
- Legal Limitations for Copying (Products with Scanning Function Only)
DO NOT place the product near chemicals or in a place where chemicals could be spilled on
it. Should chemicals come into contact with the product, there may be a risk of fire or electrical
shock. In particular, organic solvents or liquids such as benzene, paint thinner, polish remover,
or deodorizer may melt or dissolve the plastic cover and/or cables, resulting in a risk of fire or
electrical shock. These or other chemicals may cause the product to malfunction or become
discolored.
DO NOT put the product in a location that blocks or obstructs any slot or opening in the
product. These slots and openings are provided for ventilation. Blocking the machine's
ventilation could create a risk of overheating and/or fire.
Instead:
• Keep a minimum gap around the product as shown in the illustration.
Products without scanning function
Products with scanning function
• Place the product on a solid level surface.
• DO NOT place this product near or over a radiator or heater.
• DO NOT place this product in any installation unless adequate ventilation is provided.
3