Product Safety Guide
Table Of Contents
- Product Safety Guide
- Compilation and Publication Notice
- Choose a Safe Location for Your Product
- Connect the Product Safely
- Use the Product Safely
- Regulations
- Standard Telephone and FCC Notices (MFC Models Only)
- Federal Communications Commission (FCC) Declaration of Conformity (USA Only)
- RF Exposure Notice (USA or Canada Only) (Wireless Models Only)
- Wireless Connection (Mexico Only) (Wireless Models Only)
- Industry Canada Compliance Statement (Canada Only)
- EQUIPMENT ATTACHMENT LIMITATIONS (Canada Only) (MFC Models Only)
- Laser Safety (for 110-120V Models Only)
- FDA Regulations (for 110-120V Models Only)
- For Use in the USA or Canada Only
- LAN Connection (Models with Wired LAN Function Only)
- International ENERGY STAR® Qualification Statement (HL models only)
- Trademarks
- Open Source Licensing Remarks
- Copyright and License
- Legal Limitations for Copying (Products with Scanning Function Only)
CAUTION
Put your product on a flat, level, stable surface (such as a desk), that is free from vibration
and shocks. Put the product near a telephone wall jack (MFC models only) and a standard
grounded AC power outlet.
DO NOT place this product on an unstable cart, stand, or table, particularly if children are
expected to be near the product. The product is heavy and may fall, causing injury to you or
others and serious damage to the product. For the products with scanning functionality, there
is an added risk of injury if the scanner glass should break.
Avoid placing your product in a busy area. If you must place it in a busy area, ensure that the
product is in a safe location where it cannot be accidentally knocked over, which could cause
injury to you or others and serious damage to the product.
Ensure that cables and cords leading to the product are secured so as not to pose a tripping
hazard.
DO NOT place heavy objects on the product.
DO NOT place any objects around the product. Such objects block the access to the power
outlet in case of emergency. It is important that the product can be unplugged whenever
needed.
The product may generate odorous gas such as ozone if used for a large volume of printing or
used in a poorly ventilated room for multiple hours. In addition, the product emits some
chemical substances during the printing process. Ensure adequate ventilation for the product
to avoid injury or discomfort.
IMPORTANT
• DO NOT place your product next to devices that contain magnets or generate magnetic
fields. Doing so may interfere with the operation of the product, causing print quality
problems.
• DO NOT place your product next to sources of interference, such as speakers or the base
units of non-Brother cordless telephones. Doing so may interfere with the operation of the
product's electronic components.
Connect the Product Safely
WARNING
4