User's Manual

Level 3 Level 4 Level 5 Level 6 Descriptions
Wi-Fi Direct Device
Information
When the machine is not
connected, the LCD displays Not
Connected.
IP Address
- View your machine's current IP
Address.
Status
Information
Status
- View the current Wi-Fi Direct
network status.
Signal
- View the current Wi-Fi Direct
network signal strength.
When your machine acts as Group
Owner, the LCD always indicates a
strong signal.
I/F Enable
- - Turn the Wi-Fi Direct connection
on or off.
E-mail/IFAX
(Available after
Internet Fax (I-Fax) is
downloaded)
Mail Address
- - Enter the email address.
Setup Server SMTP Server
Enter the SMTP server name and
address.
Port
Enter the SMTP port number.
Auth. for
SMTP
Select the Security method for
email notification.
SSL/TLS
Send or receive an email via an
email server that requires secure
SSL/TLS communication.
Verify
Cert.
Verify the SMTP Server Certificate
automatically.
POP3/IMAP4 Protocol
Select the protocol for receiving an
email from the server.
Server
Enter the server name and
address.
Port
Enter the port number.
Mailbox
Name
Enter the mailbox name.
(Up to 60 characters)
Mailbox
Password
Enter the password to login to the
server.
(Up to 32 characters)
Select
Folder
Select the specified folder in the
mailbox using the IMAP4 protocol.
SSL/TLS
Send or receive an email via an
email server that requires secure
SSL/TLS communication.
Verify
Cert.
Verify the SMTP Server Certificate
automatically.
APOP
Turn APOP on or off.
Setup Mail RX Auto Polling Auto
Polling
Check the server for new
messages automatically.
Poll
Frequency
Set the interval for checking new
messages on the server.
Header
- Select the contents of the email
header to be printed.
693