Mass Deployment Tool User's Guide

10
- Scanners
aSelect Program Update.
b The USB flash drive details appear. Select the “read_xxx.edpk” file.
5. The settings you want will be extracted from the device and saved as a new file in the following format:
[settings file name]_[model name]_[serial number]_[index].edpk
The output log file will be automatically created.
9. The Back up Settings dialog box shows the backup progress.
To stop this operation, click the Stop button.
10. When completed, the summary results appear.
To check the destination folder of the backup file, click the Open folder button.
If unsuccessful, the error status is also listed in the results. Click the Open log folder button, check the backup
log details, and then try again.
2.7 Set Password
To change your default login password or current password.
1. Select Password settings from the drop-down list on the upper left.
2. Do one of the following:
- Change the default login password
a) Select the target devices in the list, and then select the Set a password for unconfigured devices radio button.
b) Type the password you want in the New password: and Confirm new password: fields.
c) Click Apply.
- Change the current password
a) Select the target devices in the list, and then select the Change device password radio button.
b) Click Input device password and type the current password in the Password: field.
OR
Type the current password directly in the Device password field in the list.
c) Type the new password in the New password: and Confirm new password: fields.