Multi-Protocol Print Server NC-6100h Network User's Guide Please read this manual thoroughly before using the printer. You can print or view this manual from the CD-ROM at any time, please keep the CD-ROM in a convenient place for quick and easy reference at all times. The Brother Solutions Center (http://solutions.brother.com) is your one stop resource for all your printer needs. Download the latest drivers and utilities for your printers or read the FAQs and troubleshooting tips.
Trademarks Brother is a registered trademark of Brother Industries, Ltd. HP, HP-UX, JetDirect and JetAdmin are trademarks of Hewlett-Packard Company. DEC, DEC server, VMS, LAT, and ULTRIX are trademarks of Digital Equipment Corporation. UNIX is a trademarks of UNIX Systems Laboratories. Ethernet is trademark of Xerox Corporation. Postscript is trademark of Adobe Systems Incorporated. NetWare is a trademark of Novell, Inc. Apple, Macintosh, LaserWriter, AppleTalk are trademarks of Apple Computer, Inc.
IMPORTANT NOTE: For technical and operational assistance, you must call. Calls must be made from within that country. In USA 1-800-276-7746 In Canada 1-877-BROTHER (514) 685-6464 (In Montreal) If you have any comments or suggestions, please write to us at: In Europe European Technical Services 1 Tame Street Audenshaw Manchester, M34 5JE UK In USA Printer Customer Support Brother International Corporation 15 Musick Irvine CA 92618 In Canada Brother International Corporation (Canada), Ltd.
IMPORTANT INFORMATION: REGULATIONS Federal Communications Commission (FCC) Declaration of Conformity (For U.S.A. only) Responsible Party: Brother International Corporation 100 Somerset Corporate Boulevard Bridgewater, NJ 08807-0911, USA TEL: (908) 704-1700 declares, that the products Product Name: Model Number: Brother Network Card (BR-net) NC-6100h complies with Part 15 of the FCC Rules.
Intel Copyright and License Information This products includes object code from Intel’s UPnP SDK. The following is the copyright and licensing information for Intel UPnP SDK. Copyright© 2000 Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer.
“EC” Declaration of Conformity Manufacturer Brother Industries Ltd., 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan Plant Shima Buji Xialilang Factory, Xialilang Village, Buji, Long Gang, Shenzhen, China 518112 Herewith declare that: Product description Product Name : Brother Network Card : NC-6100h are in conformity with provisions of the Directives applied: the Electromagnetic Compatibility Directive 89/336/EEC (as amended by 91/263/EEC and 92/31/EEC and 93/68/EEC).
Table of Contents IMPORTANT INFORMATION: REGULATIONS ...........iii Federal Communications Commission (FCC) Declaration of Conformity (For U.S.A. only) ..............iii Industry Canada Compliance Statement (For Canada only)...........................................................................iii Intel Copyright and License Information ....................iv Table of Contents ................................................................vi 1 2 vi Unix Printing ....................................
LAN Server, OS/2 Warp Server Configuration ........... 2-7 Server Configuration............................................... 2-7 Configuration of an OS/2 Server ............................ 2-8 Other Sources of Information ................................... 2-10 3 4 5 Peer to Peer Printing ............................................................ 3-1 How to Print in a Windows® 95/98/Me Peer to Peer Network ..........................................................................................
Brother Internet Print: Configuring the Brother Print Server ......................................................................... 5-3 Print Server Configuration Checklist....................... 5-3 Brother Internet Print: Using BRAdmin to Configure the Print Server................................................................. 5-4 Brother Internet Print: Using a Web Browser to Configure the Print Server...........................................................
Configuring the Brother Print Server (Remote Printer Mode) Using PCONSOLE and BRCONFIG............................................................... 6-18 Other Sources of Information ................................... 6-22 7 8 9 10 Printing From a Macintosh® ................................................. 7-1 Printing from a Macintosh® Using AppleTalk® and TCP/IP or the Simple Network Configuration capabilities of Mac OS® X. ..........................................................................
Changing the IP Address Using the BRAdmin Application .................................................................................. 10-2 Using BRAdmin and the IPX/SPX Protocol to Set the IP Address .................................................................... 10-3 Using BRAdmin and the TCP/IP Protocol to Set the IP Address .................................................................... 10-4 Using DHCP to Configure the IP Address ................ 10-5 Using APIPA to Configure the IP Address.
WebJetAdmin .........................................................A-2 TELNET..................................................................A-2 BRCONFIG.............................................................A-2 Using Services..................................................................A-3 General.......................................................................A-3 Reloading the Print Server Firmware................................A-4 General..............................................
1 Unix Printing 1 Printing from Unix/Linux Using TCP/IP Overview Brother print servers are supplied with the Transmission Control Protocol/Internet Protocol (TCP/IP) protocol suite. Since virtually all UNIX host computers support TCP/IP, this capability allows a printer to be shared on a UNIX Ethernet network.
4 The default name for a Brother print server is usually BRN_xxxxxx (where xxxxxx is the last six digits of the Ethernet address of the print server). 5 When configuring the PRINTCAP file, pay particular attention to the service names, BINARY_P1 and TEXT_P1. TCP/IP Brother print servers appear to the network as a UNIX host computer with a unique IP address running the lpd (line printer daemon) protocol.
The actual format of the entry may vary depending on your system, check your system documentation and also note the format of other entries in the /etc/hosts file. The node name in this file does not necessarily need to be the same as the one that is actually configured into the Brother print server (the name that appears on the printer settings page), however, it is good practice to make the names the same.
3 Configure the /etc/printcap file on each host computer to specify the local print queue, the print server name (also called remote machine or rm), and the print server service name (also called remote printer, remote queue, or rp), and the spool directory. This step applies to the majority of UNIX systems, including Linux, Sun OS (but not Solaris 2.xx), Silicon Graphics (lpr/lpd option required), DEC ULTRIX, DEC OSF/1, and Digital UNIX.
The rm and rp options are not available on some UNIX systems, so if necessary check your documentation to determine the equivalent options. Users of Berkeley-compatible UNIX systems can use the lpc command to obtain the printer status: %lpc status laser1: queuing is enabled printing is enabled no entries no daemon present Users of AT&T-compatible UNIX systems can generally use the lpstat or rlpstat commands to obtain similar status information.
Linux Configuration If you do not wish to use the command line interface to configure your Linux distribution, you may wish to use the Linux Printer System Manager application on your GUI. To do this, do the following: 1 From the Linux Printer System Manager screen, click the Add button. 2 You will now be asked to specify which Printer type you are using, select the Remote Unix (lpd) Queue option and click OK. 3 You must now specify the remote host name, remote queue name and the input filter to use.
HP-UX Configuration In the case of HP-UX10.xx, the sam program is used to set up the remote printer. The steps are as follows: 1 Execute the sam program. From the list of options, select Printers and Plotters. 2 Select LP Spooler. 3 Select Printers and Plotters. 4 Select Actions and then Add Remote Printer/Plotter. 5 Enter any name as the Printer Name (this will be the name of the print queue). 6 Enter the IP address of the print server as the Remote System Name.
Earlier versions of HP-UX use similar procedures to 10.xx users: 1 Enter sam and select Peripheral Devices and then Add Remote Printer (not Networked printer). 2 Enter the following remote printer settings (the other settings do not matter): ■ Line printer name (user-selectable). ■ Remote system name (the print server name; must match what is in hosts file or use print server IP address). ■ Remote printer queue (Print server binary or text service name, e.g. BINARY_P1 or TEXT_P1).
The procedure for pre-V4.0 systems is as follows. 1 Enter smit and select devices. 2 Select printer/plotter. 3 Select manage remote printer subsystem. 4 Select client services. 5 Select remote printer queues. 6 Select add a remote queue. 7 Enter the following remote queue settings: ■ Name of queue to add (user selectable). ■ Activate the queue (Yes).
If this is the first printer configured, you must also use the lpsched command prior to the accept command. As an alternative, you may use Printer Manager in the Admintool utility under OpenWindows. Select Edit, Add, and Add Access to Remote Printer. Then enter the print server name in the format prnservername!\prnserverservice as described above. Make sure that the printer server OS is set to BSD (the default setting), and click Add.
SCO UNIX requires TCP/IP V1.2 or later to work with Brother print servers. You must first configure the /etc/hosts and /etc/ printcap files as described in step 2. Then run the sysadmsh program as follows: 1 Select Printers. 2 Select Configure. 3 Select Add. 4 Enter the name of the print queue you entered in the /etc/ printcap file as the Printer name. 5 Enter anything as the Comment, and Class name. 6 For the Use printer interface select Existing.
Use the following one-line OS/400 command to create the LPD queue: CRTOUTQ OUTQ( RMSTSYS (*INTNETADR) RMTPRTQ() AUTOSTRWTR(1) CNNTYPE(*IP) DESTTYPE (*OTHER) MFRTYPMDL () INTNETADR('') TEXT ('') where is the new AS/400 print queue name, is the print server service name (BINARY_P1 or TEXT_P1) is the OS/400 printer driver name (*HP4 is recommended if in doubt), and is the IP address of the print server.
OS/400 version 4, 5, 5.1 You can also use the following command line to create a printer definition: CRTDEVPRT DEVD(BR2) DEVCLS(*LAN) TYPE(3812) MODEL(1) LANATTACH(*IP) PORT(9100) FONT(011) PARITY(*NONE) STOPBITS(1) TRANSFORM(*YES) MFRTYPMDL(*HP5SI) PPRSRC1(*A4) PPRSRC2(*A4) RMTLOCNAME('10.0.0.200') SYSDRVPGM(*HPPJLDRV) TEXT('Arnes Printer') Other Systems Other systems use similar programs to set up print servers.
On some systems it is also necessary to start the daemon. This is done on Berkeley-compatible UNIX systems with the lpc start command as shown in the following example: lpc start laser1 Other Sources of Information Refer to chapter 10 of this User’s Guide to learn how to configure the IP address of the printer.
2 TCP/IP Printing 2 Printing from Windows NT®4.0, Windows® 2000/XP, LAN Server and Warp Server Overview Users of Windows NT®4.0 can print directly to a network-ready Brother printer using the TCP/IP protocol. Microsoft Windows NT®4.0 users must install Microsoft's "TCP/IP printing" protocol. Windows® 2000/XP users are able to send print jobs directly to the printer without installing any additional software.
4 Windows® 95/98/Me users can send print jobs using the IPP protocol via a Windows® 2000/XP computer providing that the Microsoft Internet Print Services software is installed on the client PC, IIS is installed and running on the Windows® 2000/XP computer and that the client PC is using version 4 or later of Microsoft Internet Explorer. For more information, see Windows® 2000/XP IPP Printing on page 5-10.
3 Click on Next. 4 You must now select the correct Network printing port. Select a new port from the pull-down window and select Standard TCP/IP Port. 5 When you have done that click Next. 6 The Add Standard TCP/IP Port Wizard will now appear. Click the Next button. 7 Enter the IP address, or name of the printer you wish to configure. The Wizard will automatically enter the Port name information for you. 8 Click the Next button. 9 Windows® 2000/XP will now contact the printer that you specified.
Windows® 2000/XP Printing (Printer Driver already installed) If you have already installed the printer driver and wish to configure it for network printing, follow these steps: 1 Select the printer driver you wish to configure. 2 Select File and then choose Properties. 3 Click the Ports tab of the driver and click Add Port. 4 Select the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the New Port... button. 5 The standard TCP/IP Port Wizard will start.
7 Click OK to exit (your Windows NT®4.0 workstation or server will need to be re-booted). Windows NT®4.0 Printing: Installing the Brother Peer to Peer Software 1 Start the CD-ROM installation menu program according to the Quick Setup Guide. 2 Select the desired Language and then select Install Software. Then select the Network Print Software installation program. 3 Click on Next in response to the Welcome message. 4 Select the Brother Peer to Peer Print (LPR) button.
Windows NT®4.0 Printing: Associating to the Printer You must now create a printer on your Windows® system using the standard Windows® printer setup procedure. 1 To do this, go to the Start button, select Settings and then Printers. 2 Double click the Add Printer icon to get the Add Printer Wizard. 3 Select My Computer (not Network Printer) and click on Next.
Windows NT®4.0 Printing: Adding a Second Brother LPR Port You do not need to re-run the install program to add a new Brother LPR port. Instead, click the Start button, select Settings, and open the Printers window. Click on the icon of the printer that you wish to configure, select File from the menu bar, and then choose Properties. Click on the Ports tab and click the Add Port button. In the Printer Ports dialog, highlight Brother LPR Port. Click the New Port button and enter the port name.
Configuration of an OS/2 Server 1 From the OS/2 desktop open the Templates folder. Use the right mouse button to drag the Printer icon (not the Network Printer icon) onto the desktop. 2 The Create a Printer window should be open (if it is not, double click on the printer icon). 3 Type in any name for the printer. 4 Select the default printer driver. If the desired printer driver is not listed, click on the Install new Printer Driver button and add the driver. 5 Choose the output port.
Open the LAN Services folder and execute the LAN Requester program: 1 Select Definitions. 2 Select Aliases. 3 Select Printers. 4 Select Create. Enter the following: Alias Should be same as the printer name previously defined Description Anything you want Server name Name of OS/2 server Spooler queue Name of printer as defined previously Maximum number of users Leave blank unless you want to limit the number of users 5 Exit the LAN Requester program. 6 You should now be able to print.
11 This will make the printer appear to the software as a printer that is directly connected to the parallel port of the workstation. Other Sources of Information Refer to chapter 10 of this User’s Guide to learn how to configure the IP address of the printer.
3 Peer to Peer Printing 3 How to Print in a Windows® 95/98/Me Peer to Peer Network Overview Microsoft's Windows® 95/98/Me operating systems feature built-in networking capabilities. These capabilities allow a Windows® PC to be configured as a client workstation in a file server based network environment. For smaller networks, Windows® 95/98/Me also allows the PC to operate in a peer-to-peer mode.
4 Windows® 95/98/Me users can send print jobs using the IPP protocol via a Windows® 2000 computer providing that the Microsoft Internet Print Services software is installed on the client PC, IIS is installed and running on the Windows® 2000 and that the client PC is using version 4 or later of Microsoft Internet Explorer. 5 Brother printers are also compatible with HP JetDirect software, this means that you can use HP utilities to manage and to print to your Brother printer.
Installing the Brother Peer to Peer Software If you already installed the driver from the printer’s CD-ROM Installer and you selected "Brother Peer-to-Peer Network Printer" during the installation then you do not need to install the Brother Network Print Software again. 1 Start the CD-ROM installation menu program according to the Quick Setup Guide. 2 Select the proper model and then the Software Installation menu.
8 Click the OK button. When prompted you must re-boot your computer. Associating to the Printer You must now create a printer on your Windows® system using the standard Windows® printer setup procedure. 1 To do this, go the Start button, select Settings and then Printers. 2 Select Add Printer to begin the printer installation. 3 Click Next when you get the Add Printer Wizard window. 4 Select Local Printer when you are asked how the printers are connected to your computer, and then click Next.
Adding a Second Brother LPR Port You do not re-run the install program to add a new Brother LPR port. Instead, click the Start button, select Settings, and open the Printers window. Click on the icon of the printer that you wish to configure, select File from the menu bar, and then choose Properties. Click on the Details tab and click the Add Port button. In the Add Port dialog, select the Other radio button and then highlight Brother LPR port. Click OK and enter the port name.
4 NetBIOS Peer to Peer Printing 4 How to Print Using NetBIOS in Windows® 95/98/Me/2000/XP, Windows NT®4.0, LAN Server and OS/2 Warp Server Overview Brother print server range supports SMB (server message block) over the TCP/IP protocol via the NetBIOS interface. This means that just like regular Windows® PC's, Brother printers can appear in your network neighborhood.
Print Server Configuration In order for this function to work, you must correctly change the domain name or workgroup name to match that of your network. Once this is done, the print server will appear automatically in your network neighborhood and you will be able to send print documents to it without having to install additional software. However, in some instances you may find that your Windows® 95/98/Me/2000/XP and Windows NT®4.
Because of the way that Microsoft networks work, the print server may take several minutes to appear in the network neighborhood. You will also find that the print server may take several minutes to disappear from the network neighborhood even if the printer is switched off. This is a feature of Microsoft workgroup and domain based networks.
NetBIOS Port Monitor for Windows® 95/98/Me/ 2000/XP and Windows NT®4.0 This software requires the TCP/IP transport protocols to be installed on your Windows® 95/98/Me/2000/XP and Windows NT®4.0 computer. To install those protocols refer to your Windows® documentation. If you are using the TCP/IP protocol, the proper IP address should be defined on both the Brother print server and your client PC.
7 You must now enter the server name and port name for the actual print server. You can use the Browse button to search for the print server, select the domain/workgroup name, and then the server is listed. If the print server does not automatically appear in your browse list, then you must ensure that the domain name is configured correctly. Otherwise you must enter the name manually. The name should be compliant with UNC (Universal Name Convention). For example: \\NodeName\ServiceName.
4 Select Local Printer when you are asked how the printer is connected to your computer, and then click Next. 5 Select the correct driver. Click Next when you are done. 6 If you have selected a printer driver that is already being used, you have the option of either keeping the existing driver (recommended) or replacing it. Select the desired option and click Next.
8 Enter any desired name for the Brother printer and click Next. For example, you could call the printer "Networked Brother Printer". 9 Select Not Shared or Shared and Share Name and click Next. 10 Windows® will now ask you if you wish to print out a test page, select Yes and then select Finish. You are now ready to print. If necessary, you can share the printer on your PC so that all print jobs are routed through your computer.
Windows NT®4.0 / Windows® 2000/XP 2 Click on the Ports tab and click the Add Port button. In the Add Port dialog, highlight Brother NetBIOS port. Click New Port and enter the port name. The default port name is BNT1. If you have already used this name, you will get an error message if you try to use it again, in which case use BNT2, etc... Once you have specified the port name, click the OK button. You will then see the Port Properties Dialog.
Workstation Configuration: On each workstation that you wish to print from, execute the following step: Go to the DOS or OS/2 command prompt and enter the command: NET USE LPTx: \\NodeName\ServiceName Where x is the LPT port number (1 through 9), NodeName is the NetBIOS Name of the print server (usually BRN_xxxxxx by default, where xxxxxx is the last six digits of Ethernet address) and ServiceName is the service name of the print server (BINARY_P1 by default). For example: NET USE LPT2: \\BRN_310107\BINARY_
5 Configuring Internet 5 Printing for Windows® Internet Printing Installation Overview Brother's Brother Internet Print (BIP) software, for Windows® 95/98/ Me and Windows NT®4.0, allows a PC user at one location to send a print job to a Brother Printer at a remote location via the Internet. For example, a user on a PC in New York could print a document directly from his Microsoft Excel application program to a printer in Paris.
5 Windows® 95/98/Me users can send print jobs using the IPP protocol via Windows® 2000 computer, provided that the Microsoft Internet Print Services software is installed on the client PC, Internet Information Server (IIS) is installed and running on the server and that the client PC is using version 4 or later of Microsoft Internet Explorer. Brother Internet Print General Information The BIP software is installed using a standard Windows® 95/98/Me/ 2000/XP and Windows NT®4.0 Installation Wizard.
■ At the remote site, an E-mail server receives the E-mail message. The remote print server, which has its own E-mail address, uses the POP3 protocol (Post Office Protocol 3) to download the E-mail message from the e-mail server. It then decodes the attachment and prints it out on the printer. If an E-mail is received that has not been configured to use the BIP virtual port driver, the printer will print the E-mail out as a text document.
Brother Internet Print: Using BRAdmin to Configure the Print Server Skip this section if you wish to use the print server remote console or Web Browser to configure the print server. Using the BRAdmin Professional utility, you can configure the Brother print server using the TCP/IP protocol, or the IPX protocol. The steps required to configure the print server to receive print jobs from a Windows® 95/98/Me/2000/XP and Windows NT®4.0 PC running the BIP software is as follows: 1 Start BRAdmin.
7 The print server is configured by default to poll the POP3 server every 30 seconds. You may change this value, if desired. 8 If you have enabled notification, enter the address of your SMTP server (consult your network administrator if you do not know this address). 9 Click the OK button and save the changes. Now exit the BRAdmin application. You have now configured the print server to receive print jobs.
Brother Internet Print: Using TELNET to Configure the Print Server Skip this section if you used BRAdmin or a Web Browser to configure the remote print server. As an alternative to BRAdmin, you can use the print server remote console to configure the print server. The console can be accessed via TELNET. When you access the print server using these utilities, you will be asked for a password. The default password is access.
Brother Internet Print: Installing the BIP Software on Windows® 95/98/Me/2000/XP and Windows NT®4.0 To install the BIP software on a Windows® 95/98/2000/XP and Windows NT®4.0 PC, execute the following steps: ■ Be sure that the PC is running an E-mail program (for example, Microsoft Outlook) that is capable of sending E-mail message using Winsock. ■ Be sure that your E-mail server is capable of sending messages across the Internet.
9 You will then be asked to enter the port settings for the remote print server: Enter any unique legal Internet E-mail address for the remote print server (for example emailprinter@xyz.com). Note that Internet E-mail addresses cannot have spaces in them. Enter your E-mail address and the IP address of your SMTP E-mail server (consult your network administrator if you do not know this address). Also specify if you are going to use the Partial E-mail Print option and the Notification type.
17 Select the Brother Internet port (BIP...) which you selected in step 6 and click Next. 15 Select the Brother Internet port (BIP...) which you selected in step 6 and click Next. 16 Select the desired model of the remote printer (for example, Brother HL-series). If necessary, click Have Disk to load the driver from the CD-ROM. Click Next when you are done.
Adding a Second Brother Internet Port You should not re-run the install program to add a new Brother Internet Port. Instead, click the Start button, select Settings, and open the Printers window. Click on the icon of a printer that is using BIP, select File from the menu bar, and then choose Properties. Click on the Details (Ports on Windows NT® 4.0, Windows® 2000/ XP) tab and click the Add Port button.
of your printer). 5 When you click Next, Windows® 2000/XP will make a connection with the URL that you specified. If the printer driver has already been installed: If the appropriate printer driver is already installed on your PC, Windows® 2000/XP will automatically use that driver for use. In this case, you will simply be asked if you wish to make the driver the default driver, after which the Driver installation Wizard will complete. You are now ready to print.
Specifying a Different URL Please note that there are several possible entries that you can enter for the URL field. http://printer_ip_address:631/ipp This is the default URL and we recommend that you use this URL. Please note the Get More Info option will not display any printer data. http://printer_ip_address:631/ipp/port1 This is for HP JetDirect compatibility. Please note the Get More Info option will not display any printer data.
6 Novell NetWare Printing 6 How to Configure Novell NetWare Printing Overview Brother print servers allow NetWare client PCs to print jobs on the same printer as TCP/IP or other network protocol users. All NetWare jobs are spooled through the Novell server and delivered to the printer when it is available. Quick Tips: 1 If you create a NDPS Printer for Netware 5, you have to configure the IP address of the print server in advance.
General Information In order to use a Brother print server on a NetWare network, one or more file servers must be configured with a print queue that the print server can service. Users send their print requests to the file server's print queue, and the jobs are then spooled (either directly, or in the case of remote printer mode, via an intermediate NetWare print server) to the appropriate Brother print server.
Creating a NDPS Printer Using NWADMIN for NetWare5 With NetWare 5, Novell has released a new preferred printing system called Novell Distributed Print Services (NDPS). Before the print server can be configured, NDPS must be installed on the NetWare 5 server and an NDPS Manager configured on the server. For further information regarding NDPS printers and printing, see the Other Sources of Information section at the end of this chapter.
NDPS Broker When NDPS is installed, an NDPS broker is loaded onto the network. One of the Broker services Resource Management Service allows Printer Drivers to be installed onto the server for use with Printer Agents. To add a Printer Driver to the Broker: 1 Make sure the Resource Management Service is enabled. 2 Open the Broker Object's main window in NetWare Administrator 3 Select the Resource Management view. 4 The Resource Management dialog appears. Select the Add Resources button.
Creating a Printer Agent Follow the steps below to create a Printer Agent for the control access printer (NDS object). 1 In NetWare Administrator, select object | create | NDPS Printer. Enter the NDPS printer name. 2 If this is a new printer select create A New Printer Agent. 3 If there is already an NDS printer and you are upgrading it to use the NDPS scheme, select Existing NDS printer object. You will then have to select which printer object you wish to upgrade.
5 Select None for the printer Type, and Novell Port Handler for the Port Handler Type. Then click OK. 6 You must now specify the type of connection that you are going to use. There are four possible options. Select the LPR over IP option. 7 Enter the relevant details of the printer and Brother recommends typing Binary_P1 for the printer name. Click finish and wait. Select the printer drivers for the client operating systems. You are now ready to print.
3 One or more print servers will appear in the list (the default node names are BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)). You can find the node name and MAC address by printing out the printer settings page. Refer to the Quick Setup Guide for information on how to print the settings page on your print server. 4 Select the print server that you wish to configure and double click it. You will be asked for a password. The default password is access.
Creating the NetWare Print Server (NDS Queue Server) Using BRAdmin Professional Utility 1 Make sure that you logged in as ADMIN in NDS mode. 2 Start BRAdmin. 3 One or more print server services will appear in the list (the default node names are BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)). You can find the node name and MAC address by printing out the printer settings page.
e Your queue name will appear in the TREE and Context that you specified. Select the queue and click on Add. The queue name will then be transferred to the Service Print Queues Window. You will be able to see the TREE and Context information along with the queue name information in this Window. f Click on the Close button. Your Brother print server will now log into the appropriate NetWare server. Now exit the BRAdmin application. You are ready to print.
7 Change context if required and then double click the name of the printer you created in step 3. 8 Click Assignments. 9 Click Add. 10 Change the context if necessary. 11 Select the print queue you created in step 5. 12 Click Configuration and set the Printer type to Other/ Unknown. Click OK. 13 Change the context if required, select Object from the menu bar and then Create. When you get the New Object menu, select print server and then OK. 14 Enter the name of the print server and select Create.
18 Start the appropriate BRAdmin application, and select the correct print server from the list (by default, the node name is BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)). 19 Double click the appropriate Brother print server. You will be prompted for a password, the default password is access. Now select the NetWare tab. 20 Select Queue Server as the operating mode.
Creating the NetWare Print Server (NDS Remote Printer) Using Novell NWAdmin and BRAdmin Professional Utility To configure a Brother print server for remote printer mode with NWADMIN (NetWare Administrator utility) and BRAdmin, you will need to perform the following steps: 1 Make sure that the PSERVER NLM (NetWare Loadable Module) is loaded on your file server and that you are logged in as ADMIN in NDS mode on the NetWare 4.1x file server. 2 Start NWADMIN by double clicking on the icon.
12 Change context if necessary and select the print queue you created. Click OK and then OK again, and then exit NWADMIN. 13 Start the appropriate BRAdmin application, and select the correct print server you wish to configure (by default, the node names will begin with BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)). You can find the NetWare server name and MAC address by printing out the printer settings page.
Configuring the Brother Print Server (Queue Server Mode in Bindery Emulation Mode) Using PCONSOLE and BRCONFIG 1 Login as Supervisor (NetWare 3.xx) or ADMIN (NetWare 4.1x or later; be sure to specify the /b option for bindery mode). 2 Execute BRCONFIG from the Windows® menu. 3 Select the corresponding server name from the list of print servers.
11 Press INSERT to create a new queue on the file server, type the new queue name and press ENTER. The name does not have to be related to the name of the print server resources, but should be short and convenient for users to remember. 12 Make sure that the new queue name is highlighted, and then press ENTER to configure the queue. 13 Select Queue Servers (in NetWare 4.1x, this item is called print servers) and press ENTER to specify which network print servers can print jobs from this print queue.
Enter the NetWare print service name of the print server exactly as it appeared in the printer settings page (the default name is BRN_xxxxxx_P1, where xxxxxx is the last six digits of the Ethernet address (MAC address), unless you changed the name to something else). You can find the NetWare print service name and MAC address by printing out the printer settings page. Refer to the Quick Setup Guide for information on how to print the settings page on your print server.
13 Make sure that the new printer name is highlighted, and then press ENTER. You will be shown the Printer Configuration Window. 14 Select Print Queues Assigned: (See List), and then press ENTER. The list of print queues will be empty, since none has been selected. 15 Press INSERT to get a list of the print queues and select the print queue name which you entered in Step 7. 16 Press ESCAPE several times and go back to the Available Options menu.
■ Service is the name of the service assigned by NetWare print server name (where the default services are BRN_xxxxxx_P1 for the Brother printer, where xxxxxx is the last six digits of the Ethernet address (MAC address)). ■ You can also enter the TREE and CONTEXT name using your web browser, by connecting to the Brother print server using the TCP/IP protocol and selecting the NetWare protocol configuration.
5 Press INSERT, type in the desired print queue name (with NetWare 4.1x, you will also be asked for a volume name; press INSERT and select the appropriate volume), and press ESCAPE to return to the main menu. The following steps apply to configuring a remote printer with NDS support on NetWare 4.1x systems: 6 a Select print servers from the PCONSOLE menu and then select the print server name of the PSERVER NLM on your file server. b Select Printers. c Press INSERT to get Object, Class menu.
The following steps apply to configuring a remote printer on NetWare 3.xx systems: 6 a Select print server Information from the PCONSOLE main menu and choose the name of the PSERVER NLM. b Select print server configuration and then printer configuration. Select any Not Installed printer and press ENTER. Remember the number of this printer, since it will be used later in the configuration process. c If desired, type in a new name for the printer.
b Select the Brother print server from the list of print servers. When you get the message that the print server is connected, press the ENTER key and type the default password access in response to the # prompt (the password will not echo) and then press the ENTER key again in response to the Enter Username> prompt. When you get the Local> prompt, type: SET NETWARE NPRINTER nlm number ON service SET NETWARE RESCAN EXIT ■ Where nlm is the name of the PSERVER NLM on your file server.
Other Sources of Information 1 Visit http://solutions.brother.com for more information on network printing. 2 Refer to chapter 10 of this User’s Guide to learn how to configure the IP address of the printer.
7 Printing From a Macintosh® 7 Printing from a Macintosh® Using AppleTalk® and TCP/IP or the Simple Network Configuration capabilities of Mac OS® X. Overview Brother print servers support the AppleTalk protocol running over Ethernet (also known as EtherTalk). This allows Macintosh® users to print at the same time as all other Ethernet network using the AppleTalk (also referred to as EtherTalk) protocol. With the release of System 8.6 or later, Apple introduced a TCP/IP printing capability.
Quick Tips: 1 The default name that will appear in the Chooser of a Macintosh® will usually be BRN_xxxxxx_P1_AT (where xxxxxx is the last 6 digits of the Ethernet address) 2 From a Macintosh® network, the easiest way to change this name is to assign an IP address to the printer and then use a Web browser to change the name. Connect to the printer using a web browser and then click on Network Configuration. Enter the password (the default password is access) then select Configure AppleTalk.
Macintosh® Configuration (Mac OS® 8.6 to 9.2) Your Brother Printer is compatible with the standard Apple LaserWriter 8 printer driver (earlier versions of the LaserWriter drivers may crash or cause PostScript errors on large networks). If you do not have the LaserWriter 8 driver you must install it. Consult your Macintosh® documentation for instructions on how to do this.
How to Select the Print Server (AppleTalk/ EtherTalk) Once the print server is connected on your network and the printer is powered on, the Brother print server’s AppleTalk service name (default is BRN_xxxxxx_P1_AT, where xxxxxx is the last six digits of the Ethernet address (MAC address) should appear in the Chooser. You can find the service name and MAC address by printing out the printer settings page. Refer to the Quick Setup Guide for information on how to print the settings page on your print server.
2 Select Printer LPR, and then click OK. 3 Click Change in PostScript Printer Description (PPD) File. 4 Select the appropriate PPD file for the printer and click Select.
5 Click Change in LPR Printer Selection. 6 Enter the IP address and service name of the printer you are using. When specifying the queue, use the BRN_XXXXXX_P1_AT. XXXXXX are the last six digits of the Ethernet address. ■ Printing the printer settings page will allow you to confirm the TCP/IP address. To print the printer settings page, refer to the Quick Setup Guide. ■ If you do not specify the appropriate queue name, the printer will not print correctly.
8 Click Create. 9 Enter the name of the printer you are using under Save desktop printer as, then click Save. Example) HL-XXXX series 10 Click the printer icon on the Desktop. 11 From the Priting menu, select Set Default Printer. Whenever you send a print job, the printer that you just created will be used.
Macintosh® Configuration (Mac OS® X 10.1/10.2) The appropriate PPD file supplied with your printer must be installed. Insert the CD-ROM into the CD-ROM drive of your computer. Double click the Start Here OS X icon. Select your language and follow the on-screen instructions for Install Software. How to Select the Print Server (AppleTalk/ EtherTalk) After installing the PPD, use the following steps to select the printer driver: 1 Turn the power of the printer ON. 2 From the Go menu, select Applications.
For AppleTalk connections, the printer's AppleTalk service name is BRN_XXXXXX_P1_AT, where XXXXXX is the last six digits of the Ethernet address. Printing the settings page will allow you to confirm the MAC address. Please refer to the Quick Setup Guide for information on how to print the settings page. How to Select the Print Server (TCP/IP) After installing the PPD, use the following steps to select the printer driver: 1 Turn the power of the printer ON. 2 From the Go menu, select Applications.
Printing from a Macintosh® Using the Simple Network Configuration capabilities of Mac OS® X. The Simple Network Configuration capabilities of Mac OS® X lets you create an instant network of computers and smart devices by connecting them to each other. The smart devices automatically configure themselves to be compatible with your network. You do not need to manually configure any IP address or network strings within the printer as the printer will automatically configure itself.
Changing the Configuration From a Macintosh®, the easiest way to change the printer or print server parameters is to use a web browser. Simply connect to the printer using the format: http://ip_address where ip_address is the address of the printer. Other Sources of Information 1 Visit http://solutions.brother.com for more information on network printing. 2 Refer to chapter 10 of this User’s Guide to learn how to configure the IP address of the printer.
8 DLC Printing 8 Printing from Windows NT®4.0 or Windows® 2000 Overview DLC is a simple protocol that is included in Windows NT®4.0 and Windows® 2000 as standard. It can be used on other operating systems (such as Windows® 3.x) with the addition of vendor-supplied software that supports the Hewlett-Packard JetDirect card. Quick Tips: 1 One way to print the details of all network settings is to print a settings page. Refer to the Quick Setup Guide for information on how to print the settings page.
3 Select DLC Protocol and then OK or Add if using Windows® 2000. You may be asked for the location of the files. For Intel based computers, the necessary files are stored in the i386 directory of the Windows NT®4.0 CD-ROM. If you have a nonIntel platform, specify the correct directory on your Windows NT®4.0 CD-ROM and close the window. 4 Reboot your system to make the change take effect. Windows® 2000 should not require a re-boot.
9 The selected print server address will then appear in the smaller box under Card Address. 10 Type in any desired name for the port (the name must not be the name of an existing port or DOS device, such as LPT1) and click OK then on the Printer Ports screen, click Next. 11 Select the correct driver click Next. 12 Give a name to the printer and specify if you wish to be able to print from DOS application. Then click Next. 13 Specify the share name (if you are going to share the printer).
You can find the node name and MAC address by printing out the printer settings page. Refer to the Quick Setup Guide for information on how to print the settings page on your print server. 6 The selected print server address will then appear in the smaller box under Card Address. 7 Type in any desired name for the port (the name must not be the name of an existing port or DOS device, such as LPT1) and click OK then on the Printer Ports screen, click Close.
Brother does not recommend using the DLC protocol with Windows® for Workgroups 3.11 in a peer-to-peer configuration if the printer will be heavily used. This is because jobs may be rejected due to print spooler timeouts. The best solution in these situations is to set up one PC as a server for handling network print jobs. All of the other PCs send their print jobs to the server PC using NetBEUI or TCP/ IP, and the server PC then uses DLC to send the print jobs to the Brother print server.
9 Web Based Management 9 How to use a Web Browser to Manage Your Device Overview A standard Web Browser (we recommend Netscape Navigator version 4.0 or later/Microsoft Internet Explorer version 5.0 or later) can be used to manage your printer using the HTTP (Hyper Text Transfer Protocol). You can get the following information from a printer on your network using a web browser: 1 Printer status information. 2 Take control of the printer’s control panel.
4 You can use a web browser on most computing platforms, for example, Macintosh® and Unix users are also able to connect to the printer and manage it. 5 You can also use the BRAdmin application to manage the printer and its network configuration. How to Connect to Your Printer Using a Browser Type http://printer’s IP Address / into your browser (you can also use the NetBIOS name of the print server, if you are in a Microsoft® Windows® domain/Workgroup environment).
10 TCP/IP Configuration 10 Assigning TCP/IP Information Overview The TCP/IP protocol requires that each device on the network have it's own unique IP address. Use the following information to learn about IP address configuration. The Automatic Private IP Addressing (APIPA) protocol automatically assigns an IP address from the range: 169.254.1.0 to 169.254.254.255. If the APIPA protocol is disabled, the default IP address of a Brother print server is 192.0.0.192.
These configuration methods are described in the following paragraphs. The IP address you assign to the print server must be on the same logical network as your host computers. If it is not, you must properly configure the subnet mask and the router (gateway). Using the Printer Control Panel to Allocate an IP Address (Printers with LCD Panels Only) Refer to the Quick Setup Guide for details on how to configure IP address information using the printer control panel.
Using BRAdmin and the IPX/SPX Protocol to Set the IP Address If your PC is using the Novell NetWare Client software and is using the IPX/SPX protocol, do the following: 1 Select IPX/SPX filter in the left frame of the main window. 2 Check the print server name (the default node name is BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)).
Using BRAdmin and the TCP/IP Protocol to Set the IP Address If your PC is using the TCP/IP protocol, do the following: 1 Select TCP/IP filter in the left frame of the main window. 2 Select the Device menu and choose the Search Active Devices. If the print server is set to its factory default settings, it will not appear in the BRAdmin screen. However, selecting the Search Active Devices option will force the BRAdmin Professional utility to find the device as an unconfigured device.
Using DHCP to Configure the IP Address The Dynamic Host Configuration Protocol (DHCP) is one of several automated mechanisms for IP address allocation. If you have DHCP Server in your network (typically a Unix/Linux, Windows NT®4.0, Windows® 2000 or Novell NetWare network) the print server will automatically obtains its IP address from DHCP server and register its name with any RFC 1001 and 1002-compliant dynamic name services.
Using ARP to Configure the Print Server IP Address If you are unable to use the BRAdmin application or the printer’s control panel and your network does not use a DHCP server, you can also use the ARP command. The ARP command is available on Windows® systems that have TCP/IP installed as well as Unix systems.
T You must be on the same Ethernet segment (that is, there cannot be a router between the print server and operating system) to use the arp -s command. If there is a router, you may use BOOTP or other methods described in this chapter to enter the IP address. If your Administrator has configured the system to deliver IP addresses using BOOTP, DHCP or RARP your Brother print server can receive an IP address from any one of these IP address allocation systems.
Using RARP to Configure the IP Address The Brother print server’s IP address can be configured using the Reverse ARP (rarp) facility on your host computer. This is done by editing the /etc/ethers file (if this file does not exist, you can create it) with an entry similar to the following: 00:80:77:31:01:07 BRN_310107 Where the first entry is the Ethernet address of the print server and the second entry is the name of the print server (the name must be the same as the one you put in the /etc/hosts file).
Using BOOTP to Configure the IP Address BOOTP is an alternative to rarp that has the advantage of allowing configuration of the subnet mask and gateway. In order to use BOOTP to configure the IP address make sure that BOOTP is installed and running on your host computer (it should appear in the /etc/services file on your host as a real service; type man bootpd or refer to your system documentation for information). BOOTP is usually started up via the /etc/inetd.
Certain BOOTP host software implementations will not respond to BOOTP requests if you have not included a download filename in the configuration file; if this is the case, simply create a null file on the host and specify the name of this file and its path in the configuration file. As with rarp, the print server will load its IP address from the BOOTP server when the printer is powered on.
If you do not have any subnets, use one of the following default subnet masks: 255.255.255.0 255.255.0.0 255.0.0.0 for class C networks for class B networks for class A networks The leftmost group of digits in your IP address can identify the type of network you have. The value of this group ranges from 192 through 255 for Class C networks (e.g., 192.189.207.3), 128 through 191 for Class B networks (e.g.,128.10.1.30), and 1 through 127 for Class A networks (e.g., 13.27.7.1).
You will then get the Local> prompt. Type SET IP ADDRESS ipaddress, where ipaddress is the desired IP address you wish to assign to the print server (check with your network manager for the IP address to use). For example: Local> SET IP ADDRESS 192.189.207.3 You will now need to set the subnet mask by typing SET IP SUBNET subnet mask, where subnet mask is the desired subnet mask you wish to assign to the print server (check with your network manager for the subnet mask to use).
Other Sources of Information Visit http://solutions.brother.com for more information on TCP/IP protocol.
11 Troubleshooting 11 Overview This chapter describes procedures for troubleshooting problems you may encounter with a Brother print server, it is divided into the following sections: 1 Installation Problems 2 Intermittent Problems 3 Protocol-Specific Troubleshooting Installation Problems If you cannot print over the network, check the following: 1 Make sure that the printer is powered on, is on-line and ready to print.
2 If the configuration page prints but you cannot print documents, try the following If none of the following steps are successful, there is almost certainly a hardware or network problem! a If you are using TCP/IP: Try pinging the print server from the host operating system command prompt with the command: ping ipaddress Where ipaddress is the print server IP address (note that in some instances it can take up to two minutes for the print server to load its IP address after setting the IP address).
3 If you cannot make any of the connections in step 2, check the following: a Make sure the printer is powered on and on-line. b Check the cabling, network connection, and print out a configuration page in the Network STATISTICS information to see if bytes are being transmitted and received. c Check to see if there is any LED activity. Brother print servers have two LEDs on the back panel of the printer. The upper side LED shows Link/Speed status.
6 If the job exits the queue but does not print, make sure that you are not trying to print a text job to a PostScript printer. If you have a printer that is capable of automatic language switching, make sure that the printer is not forced into PostScript mode.
2 If you used BRCONFIG, NCP or to enter the IP address, make sure that you exited the remote console properly with a CTRLD or EXIT and that you turned the printer off and then again (it may take up to two minutes for the IP address to take effect). 3 Make sure that the TCP/IP protocol of the print server is enabled. 4 If you used rarp, make sure that you started the rarp daemon on any workstation using the rarpd, rarpd-a, or equivalent command.
3 If you are using a Berkeley-based UNIX, make sure that the daemon is started on Berkeley based systems with the command lpc start printer, where printer is the name of the local print queue. 4 If you are using an AT&T-based UNIX, make sure the printer is enabled (enable printer, where printer is the name of the local print queue). 5 Make sure that the lpr/lpd remote line printer service are running on the host computer (refer to your host computer documentation for information on how to do this).
Windows NT®4.0/LAN Server (TCP/IP) Troubleshooting If you are having trouble printing with Windows NT®4.0 or LAN Server, check the following: 1 Make sure that TCP/IP and TCP/IP print service are installed and running on the Windows NT® system or the LAN Server file server. 2 If you are using DHCP and you have not created a reservation for the print server, make sure that you enter the NetBIOS name of the print server in the Name or address of server providing lpd box.
Windows® 95/98/Me Peer-to-Peer (HP JetAdmin Compatible Method) Troubleshooting If you are having trouble printing on a Windows® 95/98/Me Peer-toPeer network, check the following (HP JetAdmin compatible method): 1 If the print server does not show up under JetAdmin on a Windows® 95/98/Me Peer-to-Peer network, try removing all of the Windows® 95/98/Me network software from the Network Control panel and then reinstalling them as follows: ■ First install the IPX/SPX-Compatible Protocol (or the TCP/IP protocol
Brother Internet Print (TCP/IP) Troubleshooting 1 The first step in troubleshooting is to make sure that you have a valid E-mail connection on both the sending PC and the receiving print server. Try sending an E-mail message from the PC to a user at the remote site who can receive mail via the POP3 server. If this does not work, there may be an E-mail configuration problem on the PC, on the local E-mail server, or on the remote POP3 server.
Get More Info option in Windows® 2000 not working If you are using a URL of: http://ip_address:631 or http://ip_address:631/ipp, the Get More Info option in Windows® 2000 will not function. If you wish to use the Get More Info option use the following URL: http://ip_address This will then force Windows® 2000/XP to use Port 80 to communicate with the Brother print server. Windows® 95/98/Me clients not able to get the driver from a Windows® 2000/XP system. You must be using version 4.
1 If you changed the login password, you must change the password in both the Brother print server (using the SET NETWARE PASSWORD command if you are using the BRConfig software) or by using a web browser or the BRAdmin application and in the file server (using the PCONSOLE Print Server Information Change Password command).
3 If you have a large network, make sure that you have the Laser Writer V8.xx or equivalent driver, since earlier versions may cause PostScript errors. Also, verify that you get the correct printer information when you select Printer Info from the Setup button in the Chooser. 4 Make sure that you have selected the correct Printer Description File (PPD) from the Chooser (otherwise PostScript errors may result). 5 Verify that you have selected the correct AppleTalk zone.
A Appendix A Appendix A General Information You can change the configuration of your print server using any of the following methods. • Brother BRAdmin application for Windows® 95/98/Me, Windows NT®4.0 and Windows® 2000/XP • Brother Web BRAdmin application for IIS* • HTTP (using a web browser) • WebJetAdmin Software • TELNET (command utility) • Brother BRCONFIG NetWare Utility (command utility) BRAdmin (Recommended) The Brother BRAdmin application can use the TCP/IP or IPX/SPX protocol.
HTTP (Recommended) Use your favorite web browser to connect to the Brother print server. This will allow you to configure printer and/or print server parameters. WebJetAdmin Brother's print server range is HP WebJetAdmin compatible. TELNET To connect to the print server using TELNET on UNIX, Windows NT®4.0, or most other TCP/IP systems, type: TELNET ipaddress at the command prompt of the system prompt, where ipaddress is the IP address of the print server.
Using Services General A service is a resource that can be accessed by computers that wish to print to the Brother print server. The Brother print server provides the following predefined services (do a SHOW SERVICE command in the Brother print server remote console to see a list of available services): Enter HELP at the command prompt for a list of supported commands. Service (Example) Definition BINARY_P1 TCP/IP binary, NetBIOS service.
Reloading the Print Server Firmware General The firmware on the print server is stored in flash memory. This means that you can upgrade the firmware by downloading the appropriate update file. To get the latest firmware update, visit the Brother Solutions web site at http://solutions.brother.com/ Some software versions that we provide will automatically factory reset your print server parameters. We try to avoid doing this.
Reloading Firmware Using BRAdmin The BRAdmin application can be used to easily re-program your Brother print server. 1 Start BRAdmin. 2 Highlight the appropriate print server. Then select the Control menu and choose Load Firmware. You can select more than one print server by pressing CTRL+
If you encounter problems upgrading the firmware and you find that the network portion of the printer no longer functions, you should try re-programming the print server by using the COPY command from the DOS prompt of your PC. To do this, connect a parallel cable between your PC and printer and use the command COPY filename LPT1:/B (where filename is the new firmware file).
Reloading Using the FTP Protocol from a Command Prompt By specifying the print server PASSWORD AS THE USERNAME when logging on, it becomes possible to upgrade the firmware of the print server or printer (if supported). The following example assumes that the print server password is "cambridge" D:\>ftp ftp> open 220.0.250.200 Connected to 220.0.250.200. 220 FTP print service:V-1.05/Use the network password for the ID if updating. User (220.0.250.200:(none)): cambridge 230 User cambridge logged in.
Reloading Using the FTP Protocol from a Web Browser Please visit the Brother Solutions Web site at http://solutions.brother.com for more information on upgrading the print server using a web browser.
Index I A F AIX ..................................... 1-3 AIX 4.0 ............................... 1-8 APIPA ....................... 1-1, 10-5 AppleTalk ...7-1, 7-4, 7-8, 11-2, 11-11 ARP ................. 1-2, 10-1, 10-6 flash memory ..................... A-4 FTP ............ 1-2, 1-11, A-4, A-7 B Berkeley UNIX ................... 1-1 BINARY_P1 .........1-2, 1-3, A-3 BINDERY ........................... 6-2 BIP ..................................... 5-1 BOOTP ..................... 1-2, 10-9 BRAdmin .....
mailboxname ..................... 5-6 Microsoft Internet Explorer 2-2 Microsoft Internet Print Services .................................. 2-2, 3-2 Microsoft TCP/IP printing ... 2-1 MIME ................................. 5-2 N PSERVER NLM ............... 6-12 R RARP ............................... 10-8 reloading firmware ............. A-5 RFC 1001 and 1002 ........ 10-5 rlpstat ................................. 1-5 S NDPS .......................... 6-2, 6-3 NDS ...................................
Windows 2000 .... 2-1, 3-2, 4-1, 5-1, 6-4, 8-1, 10-1, 11-9, 11-10 Windows 2000 printing 2-2, 2-4 Windows 95/98/Me .... 2-2, 3-1, 4-1, 5-1, 6-4, 10-1, 11-2, 11-7 Windows NT 4.0 . 2-1, 4-1, 5-1, 5-2, 6-4, 8-1, 10-1, 11-2 Windows NT 4.0 printing ... 2-4 Windows XP 2-1, 4-1, 5-1, 10-1, 11-9 workgroup ..........................
