Print Area Setting Tool Manual

4
(5) Next, enter “3 (3:current info)”, and press the Enter key to check the newly set print
area length.
Example) You can see that “Current print area length” has changed to 294.000000.
(6) After that, enter “1 (1:modify data to driver)”, and press the Enter key to reflect the
specified print area length in the driver software.
(7) Finally, enter “0 (0:exit)”, and press the Enter key to restart the Print Spooler and
close the tool.
Note) When closing the tool, always close it by entering “0 (0:exit)”. If it is not closed
by entering “0 (0:exit)”, the Print Spooler does not restart and printing cannot be
performed.