Raster Command Reference

Brother PJ-600/700/800 Series Command Reference
22
© 2015 Brother Industries, Ltd. All Rights Reserved.
Name
Set print speed
Syntax
ESC + ~ + e + V + 01 + {n1}
1B H + 7E H + 65 H + 56H + 01H + {n1}
Description
Specifies the print speed.
For details, refer to the respective commands for PJ-700 series and PJ-800 series.
PJ-600 series are not available.
Name
Set roll printer case setting
Syntax
ESC + ~ + e + R + 01 + {n1}
1B H + 7E H + 65 H + 52H + 01H + {n1}
Description
Specifies the feed setting when using roll printer case.
For details, refer to the respective commands for PJ-700 series and PJ-800 series.
PJ-600 series are not available.
Name
Set form feed mode
Syntax
ESC + ~ + f + {n1}
1B H + 7E H + 66 H + {n1}
Description
Specifies the operation that is performed when the “Form Feed” command is received.
Definition of {n1}:
0: No Feed
1: Fixed Page (default)
2: End of Page
3: End of Page Retract
[Details]
No Feed:
A page feed is not performed, even if the “Form Feed” command is received.
Fixed Page:
The page is fed the number of lines specified with the “set paper height” or “set
paper length” command.
End of Page:
The paper is fed until the end of the page is detected. However, this is a maximum of
14 inches.
End of Page Retract:
The paper is fed until the end of the page is detected, and then the paper is
readjusted to the starting position.
Name
Set dash line print