Raster Command Reference

Brother PJ-600/700/800 Series Command Reference
31
© 2015 Brother Industries, Ltd. All Rights Reserved.
Name
Specify left margin
Syntax
ESC + ｌ + {n1}
1B H + 6C H + {n1}
Description
Specifies the left margin position as the position from the left edge where
(character width when this command is specified) * n1, and specifies the area to
the left of this as an unprinted area.
Character width = 1 / Default pitch.
In addition, this printer operates as an 80-column device, and a setting that
extends past 4.5 inches from the left edge is ignored.
Definition of {n1}:01 H(1) ～ FF H(255)
The units are in columns.
Name
Specify right margin
Syntax
ESC + Q + {n1}
1B H + 51 H + {n1}
Description
Specifies the right margin position as the position from the left edge where
(character width when this command is specified) * n1.
Character width = 1 / Default pitch.
Setting that extends past 8.0 inches from the left edge and that is less than left
margin is ignored.
Note that the setting indicates the value from left edge.
Definition of {n1}:01 H(1) ～ FF H(255)
Name
Specify Default pitch
Syntax
ESC + M + {n1}
1B H + 4D H + {n1}
Description
Select the character size (pitch).
After this command is specified, the left margin and right margin must be specified
again.
Definition of {n1}
00 H(0):10cpi
01 H(1):12cpi
02 H(2):15cpi