Raster Command Reference

Brother PJ-600/700/800 Series Command Reference

Name

Auto Adjust Sensor

Syntax

ESC + ~ + e + C + {n1}

1B H + 7E H + 65 H + 43 H + {n1}

Description

Automatically adjusts the threshold for the sensor that detects the paper. The

machine that receives this command feeds the paper and detects the black mark.

After this command is sent, notification of the results is returned as 2 bytes.

Definition of {n1}

01 H(1): Perform automatic adjustment

Notification of results

・First byte

00 H(0): Failed

01 H(1): Succeeded

・Second byte

Specified paper sensor threshold value if succeeded

ex) 1B H 7E H 65 H 43 H 01 H (perform automatic adjustment)

・Reception example of notification of results 1: 00 H

→Failed to perform automatic adjustment.

・Reception example of notification of results 2: 01 H 96 H

→Succeeded in performing automatic adjustment, and set the value to 150.

Name

Factory Reset

Syntax

ESC + ~ + R

1B H + 7E H + 52 H

Description

Returns the unit to its manufacturer default settings.

Overwrites the settings in both the non-volatile memory and RAM with the

manufacturer default settings.

If the current settings are the same as the manufacturer default settings, they are

not overwritten.

Then, the reset can be saved on the machine if the “initialize” command is sent.