User`s guide

Introduction

Wi-Fi connection 4

Brother iPrint&Scan supports wireless connections that use infrastructure mode or ad-hoc mode.

To configure your Brother machine for a Wi-Fi connection, please refer to your machine’s Quick Setup and

Network User’s Guide (or Software and Network User’s Guide, depending on your model).

 Ad-hoc mode

Connect your mobile device to your machine without a wireless access point/router.

1 Mobile device

2 Wireless network machine (your machine)

 Infrastructure mode

Connect your mobile device to your machine through a wireless access point/router.

• When the Brother machine is connected to the wireless access point/router using Wi-Fi:

1 Mobile device

2 Wireless access point/router

3 Wireless network machine (your machine)