User’s Guide P330BT User’s Guide (English)
User’s Guide (English) Thank you for purchasing model P300BT, the P-TOUCH CUBE! Please read this guide, including all Precautions, before using this Machine. After reading this guide, keep it in a safe place. With your machine, you can create a wide variety of custom, self-adhesive labels. This labeller uses Brother “TZe” tapes from 3.5 to 12 mm widths. “TZe” tape cassettes are available in many colours and sizes. Visit www.brother.com for a complete list of tapes compatible with your machine.
Safety Precautions WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries. Follow these guidelines to avoid the risk of fire, burns, injury, electrical shocks, rupture, overheating, abnormal odours or smoke. • Always use the specified voltage and AC Adapter (AD-24ES) for your machine to prevent any damage or failure. • Do not touch your machine during a thunderstorm.
General Precautions • Depending on the location, material, and environmental conditions, the label may unpeel or become irremovable, the colour of the label may change or be transferred to other objects. Before applying the label, check the environmental conditions and the material. • Do not use your machine in any way or for any purpose not described in this guide. Doing so may result in accidents or damage to your machine. • Use only Brother TZe Tape Cassettes with your machine.
Declaration of Conformity (Europe/Turkey only) We, Brother Industries, Ltd. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan declare that this product and AC adapter are in conformity with the essential requirements of all relevant directives and regulations applied within the European Community. The Declaration of Conformity (DoC) can be downloaded from the Brother Solutions Center. Visit support.brother.
Performing Routine Maintenance NOTE Before performing any maintenance, power off your machine. if you use batteries, remove them and if you are using the AC Adapter, unplug it. Cleaning your machine case Wipe the case with a soft, dry cloth to remove dirt or dust. If the case is heavily soiled, wipe it with a cloth dampened with some water. NOTE Do not use solvents or agents such as benzene, paint thinner, or alcohol, which may damage your machine's surface.
Accessories If the cutter blade becomes blunt after repetitive use and the tape cannot be cut cleanly, rotate and reset the Cutter Board as shown in the illustration (1). If you still have difficulties, replace the Cutter Unit with a new one (item number: TC4) from your Brother dealer. Replacing the Cutter Unit 1. Pull out the two sections of the Cutter Unit (green) in the direction of the arrows shown in the illustration (1). 2. Install the new Cutter Unit.
Specifications Dimensions (W × D × H) Approximately 4.5" (W) × 2.4" (D) × 4.5" (H) (115 mm (W) × 61 mm (D) × 115 mm (H)) Weight Approximately 0.8 lb (380 g) (without batteries and Tape Cassette) Power Supply Optional AC Adapter (AD-24ES) 6×AAA Alkaline Batteries (LR03) Rechargeable 6×AAA Ni-MH batteries (HR03)* Interface Bluetooth Ver 2.1 + EDR Class2 Tape Cassette Brother TZe Tape Cassette Compatible widths: 3.5 mm, 6 mm, 9 mm, 12 mm * Visit us at support.brother.
Unpacking the P300BT Before using your machine, check that the package contains the following components. If any component is missing or damaged, contact your local Brother dealer.
LAK225001A User’s Guide (English) Introduction Download the P-touch Design&Print app to your mobile device Visit the download page for the [P-touch Design&Print] app using the QR code on the right. iPad/iPhone/iPod touch Go to the App Store, search for [P-touch Design&Print], and download. Android Go to Google Play™, search for [P-touch Design&Print], and download.
1. Parts and Components Front LED Tape Cutter Lever Tape Exit Slot Battery Cover Rear Power Button Cassette Cover AC Adapter Socket Tape Window Feeding Tape Power on your machine and press the Power Button twice quickly to automatically feed the tape. Cutting Tape When your label finishes printing, press the Tape Cutter Lever to cut the tape.
2. Installing Batteries or Connecting the AC Adapter This label printer requires six (6) AAA alkaline batteries or six (6) fully-charged AAA Ni-MH batteries, not included. As an alternative, use the optional AC Adapter and plug your machine into an AC socket. 1. Hold your machine as shown in the illustration. Open the Battery Cover by pressing the mark on its side (1) and pulling in the direction of the arrow (2). 2 1 2. Insert six batteries as shown in the illustration inside the case.
2. Installing Batteries or Connecting the AC Adapter (cont) CAUTION USING A COMBINATION OF DIFFERENT BATTERIES (SUCH AS ALKALINE WITH Ni-MH) MAY RESULT IN AN EXPLOSION. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. CAUTION • Remove the batteries if you do not intend to use your machine for an extended period of time. • Dispose of batteries at an appropriate collection point, not in the general waste stream. Be sure to observe all applicable federal, state, and local regulations.
3. Inserting the Tape Cassette Make sure your Tape Cassettes display the TZe mark ( ). Use only tape widths of 3.5 mm, 6 mm, 9 mm, or 12 mm. If there is a stopper on the TZe Tape Cassette, remove it before installation. 1. Hold your machine as shown in the illustration. Open the Cassette Cover by pressing the mark on its side (1) and pulling in the direction of the arrow (2). 2 Cassette Cover 1 2. Insert the Tape Cassette following the drawing marked inside the case.
4. Turning Your Machine On or Off - To turn the machine on, press the Power Button. - To turn the machine off, press and hold the Power Button for 0.5 seconds. 5. LED Indications Your machine's LED indicates your machine's status. LED Condition Steady green light Your machine is connected via Bluetooth, or the tape is feeding. Flashing green light If the green light is lit for 3 seconds, then off for 1 second, your machine is powered on and ready.
6. Pairing Your Machine with Your Mobile Device On your mobile device: 1. In Settings, access the Bluetooth option, and turn it ON. 2. When the list of discovered Bluetooth devices appears, tap P300BT**** (where **** is the last four digits of your label printer’s serial number. Alternatively, you can find your machine number on the sticker below the Power Button). The unit's serial number is located where the TZe Tape Cassette is set inside the Cassette Cover. 3.
7. Troubleshooting (cont) Problem The label is difficult to cut. Solution • Rotate and reset the Cutter Board. (see “Accessories”). • If the issue persists, replace the Cutter Unit. * Do not touch the cutter blade with your hands. My machine does not print, or • Check that the Tape Cassette has been inserted the printed characters are not correctly. formed correctly. • If the Tape Cassette is empty, replace it. • Check the Cassette Cover is securely closed.