User Manual
Table Of Contents
- User’s Guide P300BT
- Safety Precautions
- General Precautions
- Performing Routine Maintenance
- Accessories
- Specifications
- Important Information
- Unpacking the P300BT
- 1. Parts and Components
- 2. Installing Batteries or Connecting the AC Adapter
- 3. Inserting the Tape Cassette
- 4. Turning Your Machine On or Off
- 5. LED Indications
- 6. Pairing Your Machine with Your Mobile Device
- 7. Troubleshooting
NOTE
Do not use together old and new batteries. Replace all six batteries at the same time.
Connecting the AC Adapter
If you use the optional AC Adapter:
1. Insert the AC Adapter Cord into the AC Adapter Socket on the side of the machine.
2. Insert the AC Adapter into an electrical socket.
2
. Installing Batteries or Connecting the AC Adapter (cont)
CAUTION
USING A COMBINATION OF DIFFERENT BATTERIES (SUCH AS ALKALINE WITH
Ni-MH) MAY RESULT IN AN EXPLOSION. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
CAUTION
• Remove the batteries if you do not intend to use your machine for an extended period
of time.
• Dispose of batteries at an appropriate collection point, not in the general waste
stream. Be sure to observe all applicable federal, state, and local regulations.
• When storing or discarding a battery, wrap it with cellophane tape
to prevent it from short-circuiting (see illustration).
1. Cellophane tape
2. Alkaline or Ni-MH battery
2
1
AC Adapter
AC Adapter Cord