User Manual
Table Of Contents
- User’s Guide P300BT
- Safety Precautions
- General Precautions
- Performing Routine Maintenance
- Accessories
- Specifications
- Important Information
- Unpacking the P300BT
- 1. Parts and Components
- 2. Installing Batteries or Connecting the AC Adapter
- 3. Inserting the Tape Cassette
- 4. Turning Your Machine On or Off
- 5. LED Indications
- 6. Pairing Your Machine with Your Mobile Device
- 7. Troubleshooting
- To turn the machine on, press the Power Button.
- To turn the machine off, press and hold the Power Button for 0.5 seconds.
Your machine's LED indicates your machine's status.
4. Turning Your Machine On or Off
5. LED Indications
LED Condition
Steady green light
Your machine is connected via Bluetooth, or the tape is
feeding.
Flashing green light
If the green light is lit for 3 seconds, then off for 1 second,
your machine is powered on and ready.
Flashing green light
If the green light flashes at 0.5 second intervals, the unit
is receiving data from your mobile device.
Steady red light Your machine is booting. (see “7. Troubleshooting”)
Flashing red light
If the red light flashes at 1 second intervals, one of the
following has occurred:
• No Tape Cassette installed
• Incorrect Tape Cassette installed
• Incompatible Tape Cassette installed
• Transmission error (see “7. Troubleshooting”)
• Cutter error
• Incompatible AC Adapter used
(see “7. Troubleshooting”)
Flashing red light
If the red light flashes at 0.5 second intervals, there is a
system error (see “7. Troubleshooting”).
Flashing orange light
If the orange light flashes at 1 second intervals, the
batteries are almost out of power.