ESC/ P Command Reference
Table Of Contents
- ESC/P Command Reference
- IMPORTANT - PLEASE READ CAREFULLY
- Contents
- Introduction
- What is ESC/P?
- 1. Using ESC/P Commands
- 2. Examples of Using ESC/P Commands
- 3. ESC/P Command Limitations
- 4. Control Code List
- 5. Control Command Details
- 5.1 Character/style selection commands
- 5.2 Text printing commands
- ESC 4 Apply italic style
- ESC 5 Cancel italic style
- ESC E Apply bold style
- ESC F Cancel bold style
- ESC G Apply double-strike printing
- ESC H Cancel double-strike printing
- ESC P Apply pica pitch (10 cpi)
- ESC M Apply elite pitch (12 cpi)
- ESC g Apply micron pitch (15 cpi)
- ESC p Specify proportional characters
- ESC W Specify double-width characters
- SO Specify auto-canceling stretched characters
- ESC SO Specify auto-canceling stretched characters
- SI Specify compressed characters
- ESC SI Specify compressed characters
- DC2 Cancel compressed characters
- DC4 Cancel auto-canceling double-width characters
- ESC – Apply/cancel underlining
- ESC ! Global formatting
- ESC SP Specify character spacing
- ESC X Specify character size
- 5.3 Line feed commands
- 5.4 Horizontal movement commands
- 5.5 Vertical movement commands
- 5.6 Paper formatting commands
- 5.7 Printer control commands
- 5.8 Graphics commands
- 5.9 Advanced commands
- ESC i B Barcode
- ESC i Q 2D barcode (QR Code)
- ESC i P QR Code version
- ESC i V 2D barcode (PDF417)
- ESC i D 2D barcode (DataMatrix)
- ESC i M 2D barcode (MaxiCode)
- ESC i J 2D barcode (Aztec)
- ESC i G Specify font
- ESC i F P Print downloaded data
- ESC i a Switch command mode
- ESC i S Status information request
- ESC i L Specify landscape orientation
- ESC i C Specify cutting
- ESC i H Specify recovery setting
- 5.10 Advanced static commands
- ESC iXQ2 Select default character style
- ESC iXQ1 Retrieve default character style
- ESC iXk2 Select default font
- ESC iXk1 Retrieve default font
- ESC iXX2 Specify default character size
- ESC iXX1 Retrieve default character size
- ESC iX32 Specify default line feed
- ESC iX31 Retrieve default line feed
- ESC iXA2 Select default alignment
- ESC iXA1 Retrieve default alignment
- ESC iX(2 Specify default page length
- ESC iX(1 Retrieve default page length
- ESC iXL2 Select default landscape orientation
- ESC iXL1 Retrieve default landscape orientation
- ESC iXj2 Select default international character set
- ESC iXj1 Retrieve default international character set
- ESC iXm2 Select default character code set
- ESC iXm1 Retrieve default character code set
- ESC iXd2 Specify recovery setting
- ESC iXd1 Retrieve recovery setting
- ESC iXv2 (0Ch) Specify recovery count
- ESC iXv1 (0Ch) Retrieve recovery count
- ESC iXE2 Specify barcode margin setting
- ESC iXE1 Retrieve barcode margin setting
- ESC iX_2 (00h) Specify line print setting
- ESC iX_1 (00h) Retrieve line print setting
- ESC iX_2 (01h) Specify line print timeout setting
- ESC iX_1 (01h) Retrieve line print timeout setting
- ESC i DC1 SQ(01h) Specify self-printing QR code content
- ESC i DC1 SQ(00h) Retrieve self-printing QR code content
- ESC i DC1 SR(01h) Select setting change lock
- ESC i DC1 SR(00h) Retrieve setting change lock
- Appendix A: Supported Printers
- Appendix B: Specifications
- Appendix C: Character Code Tables
- Appendix D: Introducing the Brother Developer Center
- brother US ENG
ESC/P Command Reference
- 29 -
5. Control Command Details
ESC P Apply pica pitch (10 cpi)
ASCII: ESC P
Hexadecimal: 1B 50
Parameters
None
Description
Prints the subsequent text with the pica pitch (10 characters/inch).
The character spacing is 20 dots (30 dots for 300dpi printers).
If the character width is 20(or 30) dots or less, the character spacing is specified as 20(or 30) minus the
character width.
If the character width exceeds 20(or 30) dots, the character spacing is specified as the character width.
(The spacing between characters is 0 dot.)
In this case, the pitch does not exactly equal the pica pitch.
With double-width characters, the character spacing is doubled (40(or 60) dots).
With half-width characters, the character spacing is halved (10(or 15) dots).
When the character spacing is changed with ESC SP, the setting is updated.
This command is invalid when proportional pitch is selected.
In outline fonts, the spacing between characters is 0 dot.
Please refer to Appendix B: Specifications.
Setting
(dots)
Full Width
Double Width
Half Width
16
24
32
48
16
24
32
48
16
24
32
48
Width (dots)
Gothic 16 24 32 - 32 48 64 - 8 12 16 -
Letter
Gothic
Bold
8 10 14 22 16 20 28 44 4 5 7 11
Brussels - 25 35 56 - 50 70 112 - 13 18 26
Helsinki 16 21 28 44 30 42 56 88 8 11 14 22
San Diego - 24 35 57 - 48 70 114 - 12 18 29
Brougham - 11 16 26 - 22 32 52 - 6 8 13
The above table refers to characters with a fixed pitch. (Applying styles may increase the size.)