ESC/ P Command Reference
Table Of Contents
- ESC/P Command Reference
- IMPORTANT - PLEASE READ CAREFULLY
- Contents
- Introduction
- What is ESC/P?
- 1. Using ESC/P Commands
- 2. Examples of Using ESC/P Commands
- 3. ESC/P Command Limitations
- 4. Control Code List
- 5. Control Command Details
- 5.1 Character/style selection commands
- 5.2 Text printing commands
- ESC 4 Apply italic style
- ESC 5 Cancel italic style
- ESC E Apply bold style
- ESC F Cancel bold style
- ESC G Apply double-strike printing
- ESC H Cancel double-strike printing
- ESC P Apply pica pitch (10 cpi)
- ESC M Apply elite pitch (12 cpi)
- ESC g Apply micron pitch (15 cpi)
- ESC p Specify proportional characters
- ESC W Specify double-width characters
- SO Specify auto-canceling stretched characters
- ESC SO Specify auto-canceling stretched characters
- SI Specify compressed characters
- ESC SI Specify compressed characters
- DC2 Cancel compressed characters
- DC4 Cancel auto-canceling double-width characters
- ESC – Apply/cancel underlining
- ESC ! Global formatting
- ESC SP Specify character spacing
- ESC X Specify character size
- 5.3 Line feed commands
- 5.4 Horizontal movement commands
- 5.5 Vertical movement commands
- 5.6 Paper formatting commands
- 5.7 Printer control commands
- 5.8 Graphics commands
- 5.9 Advanced commands
- ESC i B Barcode
- ESC i Q 2D barcode (QR Code)
- ESC i P QR Code version
- ESC i V 2D barcode (PDF417)
- ESC i D 2D barcode (DataMatrix)
- ESC i M 2D barcode (MaxiCode)
- ESC i J 2D barcode (Aztec)
- ESC i G Specify font
- ESC i F P Print downloaded data
- ESC i a Switch command mode
- ESC i S Status information request
- ESC i L Specify landscape orientation
- ESC i C Specify cutting
- ESC i H Specify recovery setting
- 5.10 Advanced static commands
- ESC iXQ2 Select default character style
- ESC iXQ1 Retrieve default character style
- ESC iXk2 Select default font
- ESC iXk1 Retrieve default font
- ESC iXX2 Specify default character size
- ESC iXX1 Retrieve default character size
- ESC iX32 Specify default line feed
- ESC iX31 Retrieve default line feed
- ESC iXA2 Select default alignment
- ESC iXA1 Retrieve default alignment
- ESC iX(2 Specify default page length
- ESC iX(1 Retrieve default page length
- ESC iXL2 Select default landscape orientation
- ESC iXL1 Retrieve default landscape orientation
- ESC iXj2 Select default international character set
- ESC iXj1 Retrieve default international character set
- ESC iXm2 Select default character code set
- ESC iXm1 Retrieve default character code set
- ESC iXd2 Specify recovery setting
- ESC iXd1 Retrieve recovery setting
- ESC iXv2 (0Ch) Specify recovery count
- ESC iXv1 (0Ch) Retrieve recovery count
- ESC iXE2 Specify barcode margin setting
- ESC iXE1 Retrieve barcode margin setting
- ESC iX_2 (00h) Specify line print setting
- ESC iX_1 (00h) Retrieve line print setting
- ESC iX_2 (01h) Specify line print timeout setting
- ESC iX_1 (01h) Retrieve line print timeout setting
- ESC i DC1 SQ(01h) Specify self-printing QR code content
- ESC i DC1 SQ(00h) Retrieve self-printing QR code content
- ESC i DC1 SR(01h) Select setting change lock
- ESC i DC1 SR(00h) Retrieve setting change lock
- Appendix A: Supported Printers
- Appendix B: Specifications
- Appendix C: Character Code Tables
- Appendix D: Introducing the Brother Developer Center
- brother US ENG
ESC/P Command Reference
- 85 -
5. Control Command Details
ESC i D 2D barcode (DataMatrix)
ASCII: ESC i D or d data
Hexadecimal: 1B 69 44 or 64 data
Format: ESC i D or d [Parameters] [Barcode data] \\\
(1) (2) (3)
Parameters
(1) [Parameters]
Unlike with 1D barcodes, all parameters must be specified in order, starting from the top.
If a value other than those listed is entered for a parameter, that parameter is specified with its default
value.
1. Cell size
[1-byte decimal] 1
[1-byte decimal] 2
[1-byte decimal] 3
[1-byte decimal] 4
[1-byte decimal] 5
[1-byte decimal] 6
[1-byte decimal] 8
[1-byte decimal] 10
Specifies the dot size per cell side.
Prints 1 dot per cell side.
Prints 2 dots per cell side.
Prints 3 dots per cell side. (default value)
Prints 4 dots per cell side.
Prints 5 dots per cell side.
Prints 6 dots per cell side.
Prints 8 dots per cell side.
Prints 10 dots per cell side.
2. Symbol
type
[1-byte decimal] 0
[1-byte decimal] 1
ECC200 square (default value)
ECC200 rectangular
3. Vertical
size
[1-byte decimal] 0
[1-byte decimal] 10
[1-byte decimal] 12
[1-byte decimal] 14
[1-byte decimal] 16
[1-byte decimal] 18
[1-byte decimal] 20
[1-byte decimal] 22
[1-byte decimal] 24
[1-byte decimal] 26
[1-byte decimal] 32
[1-byte decimal] 36
[1-byte decimal] 40
[1-byte decimal] 44
[1-byte decimal] 48
[1-byte decimal] 52
[1-byte decimal] 64
[1-byte decimal] 72
[1-byte decimal] 80
[1-byte decimal] 88
[1-byte decimal] 96
(continued to the next page)
[ECC200 square]
Vertical no. of cells: AUTO (default value)
Vertical no. of cells: 10 cells
Vertical no. of cells: 12 cells
Vertical no. of cells: 14 cells
Vertical no. of cells: 16 cells
Vertical no. of cells: 18 cells
Vertical no. of cells: 20 cells
Vertical no. of cells: 22 cells
Vertical no. of cells: 24 cells
Vertical no. of cells: 26 cells
Vertical no. of cells: 32 cells
Vertical no. of cells: 36 cells
Vertical no. of cells: 40 cells
Vertical no. of cells: 44 cells
Vertical no. of cells: 48 cells
Vertical no. of cells: 52 cells
Vertical no. of cells: 64 cells
Vertical no. of cells: 72 cells
Vertical no. of cells: 80 cells
Vertical no. of cells: 88 cells
Vertical no. of cells: 96 cells