User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
How to Use P-touch Transfer Manager & P-touch Library
91
7
Transferring Templates or Other Data from the Computer to the Printer 7
Use the following procedure to transfer templates, databases and images from the computer to the printer.
1 Connect the computer and the printer using a USB cable or a wireless connection and turn the printer on.
2 Start the P-touch Transfer Manager.
The printer model name appears next to a printer icon in the folder view.
If you select the printer in the folder view, the current templates and other data stored in the printer
appear.
Note
• If a printer is disconnected or offline, it is not listed in the folder view.
• Before transferring data, check that the computer and the printer are correctly connected using a USB
cable or a wireless connection, and that the printer is on.
3 Select the printer that you want to transfer the template or other data to.
Note
Before transferring data, check that the computer and the printer are correctly connected with a USB cable
or a wireless connection and that the printer power is On.