User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
How to Use P-touch Transfer Manager & P-touch Library
97
7
Deleting All the Printer Data 7
Use the following procedure to delete all templates or other data that are saved in the printer.
Important
This feature is only available when the computer and printer are connected via USB.
1 Connect the computer and the printer and switch the printer’s power On.
The printer model name is displayed in the folder view.
2 Right-click the printer, and then select [Delete All].
A confirmation message appears.
3 Click [OK].
All templates and other data saved in the printer are deleted.