User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
How to Update P-touch Software
113
9
Updating the Firmware 9
Important
• The printer driver must be installed before updating the firmware.
• Do not turn off the power when transferring data or updating firmware.
• If another application is running, exit the application.
1 Turn the printer on and connect the USB cable.
2 For Windows Vista / Windows 7 / Windows Server 2008 / Windows Server 2008 R2
Double-click the [P-touch Update Software] icon.
Note
The following method can also be used to start the P-touch Update Software.
Click the Start button, and then select [All Programs]- [Brother P-touch]- [P-touch Update Software].
For Windows 8 / Windows 8.1 / Windows Server 2012 / Windows Server 2012 R2
Click [P-touch Update Software] on [Apps] screen or double-click [P-touch Update Software] on the
desktop.
For Windows 10
From the Start button, (select [All apps], and then) click [Brother P-touch]- [P-touch Update
Software], or double-click [P-touch Update Software] on the desktop.
3 Click the [Machine update] icon.