User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
How to Update P-touch Software
114
9
4 Select the [Printer], ensure that [The machine is connected correctly.] is displayed, and then click
[OK].
5 Select the [Language], select the check box next to the firmware to be updated, and then click
[Transfer].
Important
Do not turn off the printer or disconnect the cable while the data is being transferred.
6 Check the content to be updated, and then click [Start] to begin the update.
The download of the software starts.
Note
Do not turn off the printer during the update process.