User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
123
13
13
Product Specifications 13
Model Name RJ-2030 RJ-2050 RJ-2140 RJ-2150
Printing
Printing technology Direct Thermal
Print resolution 203 dpi
Print speed (Depends on
the media used.)
Maximum 6 ips (152 mm/sec)
(Under Brother standard environment)
Maximum print width Receipt: 2" (51 mm)
Label: 1.89" (48 mm)
2.12" (54 mm)
Maximum print length 39.37" (1 m)
Minimum print length 0.5" (12.7 mm)
Size
Weight (including battery) Approximately 1.03 lb./465 g Approximately 1.20 lb./545 g
Dimensions Approximately 3.9 (D) × 4.8 (W) × 2.2 (H) in. /
100 (D) × 122 (W) × 57 (H) mm
Approximately 3.9 (D) × 5.9 (W) × 2.9 (H) in. /
100 (D) × 151 (W) × 73 (H) mm
Interface
USB USB Ver. 2.0 (Full Speed) (mini-B)
Bluetooth Ver 2.1 + EDR
Supported profiles:
SPP, OPP, BIP,
HCRP
Ver 2.1 + EDR
Supported profiles:
SPP, OPP, BIP,
HCRP
Supported protocol:
iAP
- Ver 2.1 + EDR
Supported profiles:
SPP, OPP, BIP,
HCRP
Supported protocol:
iAP
Wireless LAN - IEEE 802.11g/n (Wireless Direct)
IEEE 802.11b/g/n (Infrastructure Mode)
IEEE 802.11b/g/n (Ad-hoc Mode)
2
Environment
Operating temperature Operate: 14°F to 122°F (-10°C to 50°C)
Charge: 32°F to 104°F (0°C to 40°C)
Operating humidity 10% to 90% (No condensation, Maximum wet bulb temperature: 80.6 °F / 27 °C)
Storage temperature -4°F to 140°F (-20°C to 60°C) Do not leave your printer inside a car where the temperature
is over 140°F (60°C).
Storage humidity 10% to 90% (No condensation, Maximum wet bulb temperature: 113°F / 45°C)
Power supply
Battery Rechargeable Li-ion battery: 7.2 V
Adapter (optional) AC adapter (15 V)
Car adapter (optional) Cigarette lighter car adapter (12 V (DC))