User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
Product Specifications
124
13
1
For RJ-2030/2050: Only when there are black marks on the back of the backing paper.
2
Not all computers, mobile devices, and operating systems, may support Ad-hoc mode.
Maximum number of
labels
6,400 labels (for continuous printing when connected using USB and using a new, fully
charged rechargeable Li-ion battery)
Tested using Brother's print test data (13% coverage, 2" × 1" (51 × 25.4 mm)) at 73.4°F
(23°C).
Charging time 3 hours (when charging at 73.4°F (23°C) with the printer turned off, and using a new
rechargeable Li-ion battery)
Media specification
Media type Receipt, Label
1
Receipt, Label
Media width 2" (51mm) 1" ~ 2.28" (25.4mm ~ 58mm)
Gap between labels - 0.12" (3 mm) or more
Thickness Receipt: 2.3 mil to 3.5 mil (0.058 mm to 0.090 mm)
Label: 3.2 mil to 6.7 mil (0.080 mm to 0.170 mm)
1
Roll outside diameter
(max)
1.57" (40 mm) 2.36" (60 mm)
Core diameter (min) Receipt, Label
1
: 0.41" (10.2 mm) Receipt, Label: 0.41" (10.2 mm)
Media sensor Reflective Transmissive, Reflective
Compatible operating systems
See support.brother.com
for a complete and updated list of software.
Model Name RJ-2030 RJ-2050 RJ-2140 RJ-2150