User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
Setting Up the Printer
8
1
Recharging the Battery 1
While Installed in the Printer 1
To charge the rechargeable Li-ion battery (PA-BT-003), insert it into the printer and do the following:
Note
• Before using the rechargeable Li-ion battery, use the following procedure to charge it.
• Print speed varies with the available battery power.
1 Make sure that the rechargeable Li-ion battery is installed in the printer.
2 Use the compatible Brother AC adapter (PA-AD-600A) and AC power cord to connect the printer to an
AC power outlet (see Recharging the Battery Using the AC Adapter (Optional) on page 9), or use the
Brother compatible car adapter to connect the printer to a DC power outlet (see Recharging the Battery
Using the Car Adapter (Optional) on page 10).
Note
The LED indicator light is orange when the battery is charging.
When the rechargeable Li-ion battery is fully charged, the LED indicator turns off (when power is turned
off) or lights in green (when power is turned on). Disconnect the AC adapter or car adapter from the
battery’s DC connector.