User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
Setting Up the Printer
10
1
Recharging the Battery Using the Car Adapter (Optional) 1
Connect your printer to your vehicle’s 12 V DC power outlet (cigarette lighter or similar) to charge the
rechargeable battery.
1 Make sure that the rechargeable Li-ion battery is installed in the printer.
2 Connect the car adapter to the vehicle’s 12 V DC power outlet.
3 Open the interface cover and connect the car adapter to your printer.
1 Car adapter
Note
The car adapter is an optional accessory.
Recharging the Battery Using the Battery Charger (Optional) 1
When you use an AC power outlet, up to four battery chargers can be connected together for charging at the
same time.
For more information, see the operation manual that is included with the battery charger.
1