User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
Setting Up the Printer
12
1
Turning the Printer On or Off 1
On: Press and hold the (Power) button until the LCD turns on.
Off: Press and hold the
(Power) button until the message [System Off] appears on the LCD.
Setting the Language of the LCD 1
1 Press the [Menu], [b] button to select the [Settings] menu, and then press the [OK] button.
2 Select [ Language], and then press the [OK] button.
3 Select a language, and then press the [OK] button.
Inserting the Paper or Label Roll 1
For RJ-2030/2050 1
1 Pull the cover open lever in the direction shown to open the media roll compartment cover.
1 Cover open lever
2 Insert the media roll into the media roll compartment with the roll feeding from the bottom as shown.
1 Print surface
(faces outwards on the roll)
1
1