User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
Setting Up the Printer
14
1
For RJ-2140/2150 1
1 Pull the cover open lever in the direction shown to open the media roll compartment cover.
1 Cover open lever
2 Open the roll guides by lifting the roll guide adjustment lever and pulling both roll guides outwards.
Insert the media roll into the media roll compartment with the roll feeding from the bottom as shown.
Important
• Make sure that both roll guides are correctly positioned to prevent the media roll from moving sideways.
• The thermal sensitive side must be on the outside of the roll and installed as shown to print correctly.
1 Roll guide adjustment lever
2 Roll guide
3 Print surface (faces outwards on the roll)
1
1
1
2
2
3