User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
Setting Up the Printer
29
1
WPS (Wi-Fi Protected Setup™) 1
If your Wi-Fi access point/router supports WPS, settings and connections can be configured quickly.
1 First, confirm that your Wi-Fi access point/router has the WPS symbol.
2 Place your printer within the range of your Wi-Fi access point/router. The range may differ depending on
your environment. See the instructions provided with your Wi-Fi access point/router.
3 Press the WPS button on your Wi-Fi access point/router.
4 On your printer, press the [Menu], [ ] button to select the [WLAN] menu, and then press the [OK] button.
5 Press the [ ] button to select the [WPS] menu, and then press the [OK] button.
6 Select [Start], and then press the [OK] button.
When the connection is established, the WLAN icon appears on your printer's LCD. Computers and mobile
devices that are on the same network as the printer will have access to the printer.
Note
Your printer will try to connect using WPS for two minutes. If the [Menu] button is pressed during that time,
the printer will continue trying to connect for an additional two minutes.