User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
Setting Up the Printer
30
1
LCD 1
LCD Settings 1
You can specify the LCD settings either by using the printer, or by using the Printer Setting Tool on a
computer connected to the printer. For more information about connecting a computer and specifying
settings, see Changing the Printer Settings on page 34.
Specifying Settings from the Printer 1
Press the [Menu], [ ] button to select a menu option, and then press the [OK] button. Press [ ] to select an
option, and then press the [OK] button.
1 The currently selected option is highlighted.
2 The scroll bar indicates the first parameter with the up arrow, and the last parameter with the down arrow.
If the last parameter is selected, pressing [ ] scrolls to the first parameter.
Displaying the Media Information 1
1 Press the [Menu], [ ] button to select the [Media] menu, and then press the [OK] button.
Setting the LCD Contrast 1
1 Press the [Menu], [ ] button to select the [Settings] menu, and then press the [OK] button.
2 Select [LCD Contrast], and then press the [OK] button. Select the option, and then press the [OK]
button.
Setting the Beeper 1
Select whether the printer beeps when an operation button is pressed.
1 Press the [Menu], [ ] button to select the [Settings] menu, and then press the [OK] button.
2 Select [Beeper], and then press the [OK] button. Select the option, and then press the [OK] button.
2
1