User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
Setting Up the Printer
31
1
Updating the Printer (RJ-2050/2140/2150 only) 1
Connect to the FTP server and download the templates, databases, and other updated files. Set the
information of the FTP server in advance using [Communication Settings] in the Printer Setting Tool. For
more information, see Communication Settings on page 37.
This item appears when the FTP server is set and updated files are available.
1 Press the [Menu], [ ] button to select the [Update] menu, and then press the [OK] button.
2 Select [Start], and then press the [OK] button.
When the update starts, [Receiving] or [Downloading] appears on the LCD.