User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
34
3
3
Printer Setting Tool 3
Using the Printer Setting Tool, you can specify the printer’s communication settings, device settings, P-touch
Template settings and Paper Size Setup from a Windows computer.
Note
The Printer Setting Tool is installed automatically when you use the initial installer to install the printer
driver. For more information, see Install Software to Your Computer or Mobile Device on page 21.
Important
The Printer Setting Tool is available only with compatible printers.
Before Using the Printer Setting Tool 3
Make sure a fully-charged battery is installed.
Make sure the printer driver has been installed correctly and you can print.
Connect this printer to a computer with a USB cable. Settings cannot be specified using Wi-Fi using this
tool.
Changing the Printer Settings 3